Harmonised standards – Low Voltage Directive (LVD)
| Edition | Status |
|---|---|
| EN 13637:2015 Building hardware – Electrically controlled exit systems for use on escape routes – Requirements and test methods | reference published (presumption of conformity) |
| EN 50065-4-2:2001 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz – Part 4-2: Low voltage decoupling filters – Safety requirements Amendments and corrigenda: EN 50065-4-2:2001/A1:2003, EN 50065-4-2:2001/A2:2005 | reference published (presumption of conformity) |
| EN 50065-4-7:2005 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz – Part 4-7: Portable low voltage decoupling filters – Safety requirements Amendments and corrigenda: EN 50065-4-7:2005/AC:2006 | reference published (presumption of conformity) |
| EN 50085-1:2005 Cable trunking systems and cable ducting systems for electrical installations – Part 1: General requirements Amendments and corrigenda: EN 50085-1:2005/A1:2013 | reference published (presumption of conformity) |
| EN 50085-2-1:2006 Cable trunking systems and cable ducting systems for electrical installations – Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings Amendments and corrigenda: EN 50085-2-1:2006/A1:2011 | reference published (presumption of conformity) |
| EN 50085-2-2:2008 Cable trunking systems and cable ducting systems for electrical installations – Part 2-2: Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor | reference published (presumption of conformity) |
| EN 50085-2-3:2010 Cable trunking systems and cable ducting systems for electrical installations – Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets | reference published (presumption of conformity) |
| EN 50085-2-4:2009 Cable trunking systems and cable ducting systems for electrical installations – Part 2-4: Particular requirements for service poles and service posts | reference published (presumption of conformity) |
| EN 50106:2008 Safety of household and similar electrical appliances – Particular rules for routine tests referring to appliances under the scope of EN 60335-1 | reference published (presumption of conformity) |
| EN 50117-1:2002 Coaxial cables – Part 1: Generic specification Amendments and corrigenda: EN 50117-1:2002/A1:2006, EN 50117-1:2002/A2:2013 | reference published (presumption of conformity) |
| EN 50117-2-1:2005 Coaxial cables – Part 2-1: Sectional specification for cables used in cabled distribution networks – Indoor drop cables for systems operating at 5 MHz – 1 000 MHz Amendments and corrigenda: EN 50117-2-1:2005/A1:2008, EN 50117-2-1:2005/A2:2013 | reference published (presumption of conformity) |
| EN 50117-2-2:2004 Coaxial cables – Part 2-2: Sectional specification for cables used in cabled distribution networks – Outdoor drop cables for systems operating at 5 MHz – 1 000 MHz Amendments and corrigenda: EN 50117-2-2:2004/A1:2008, EN 50117-2-2:2004/A2:2013 | reference published (presumption of conformity) |
| EN 50117-2-3:2004 Coaxial cables – Part 2-3: Sectional specification for cables used in cabled distribution networks – Distribution and trunk cables for systems operating at 5 MHz – 1 000 MHz Amendments and corrigenda: EN 50117-2-3:2004/A1:2008, EN 50117-2-3:2004/A2:2013 | reference published (presumption of conformity) |
| EN 50117-2-4:2004 Coaxial cables – Part 2-4: Sectional specification for cables used in cabled distribution networks – Indoor drop cables for systems operating at 5 MHz – 3 000 MHz Amendments and corrigenda: EN 50117-2-4:2004/A1:2008, EN 50117-2-4:2004/A2:2013 | reference published (presumption of conformity) |
| EN 50117-2-5:2004 Coaxial cables – Part 2-5: Sectional specification for cables used in cabled distribution networks – Outdoor drop cables for systems operating at 5 MHz – 3 000 MHz Amendments and corrigenda: EN 50117-2-5:2004/AC:2012, EN 50117-2-5:2004/A1:2008, EN 50117-2-5:2004/A2:2013 | reference published (presumption of conformity) |
| EN 50117-3-1:2002 Coaxial cables – Part 3-1: Sectional specifications for cables used in Telecom applications – Miniaturized cables used in digital communication systems | reference published (presumption of conformity) |
| EN 50117-4-1:2008 Coaxial cables – Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 – Indoor drop cables for systems operating at 5 MHz – 3 000 MHz Amendments and corrigenda: EN 50117-4-1:2008/A1:2013 | reference published (presumption of conformity) |
| EN 50117-4-2:2015 Coaxial cables – Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks | reference published (presumption of conformity) |
| EN 50156-1:2015 Electrical equipment for furnaces and ancillary equipment – Part 1: Requirements for application design and installation | reference published (presumption of conformity) |
| EN 50156-2:2015 Electrical equipment for furnaces and ancillary equipment – Part 2: Requirements for design, development and type approval of safety devices and subsystems | reference published (presumption of conformity) |
| EN 50214:2006 Flat polyvinyl chloride sheathed flexible cables Amendments and corrigenda: EN 50214:2006/AC:2007 | reference published (presumption of conformity) |
| EN 50214:2024 Flat flexible cables | reference published (presumption of conformity) |
| EN 50250:2002 Conversion adaptors for industrial use Amendments and corrigenda: EN 50250:2002/A1:2015, EN 50250:2002/AC:2007 | reference published (presumption of conformity) |
| EN 50274:2002 Low-voltage switchgear and controlgear assemblies – Protection against electric shock – Protection against unintentional direct contact with hazardous live parts Amendments and corrigenda: EN 50274:2002/AC:2009 | reference published (presumption of conformity) |
| EN 50288-1:2013 Multi-element metallic cables used in analogue and digital communication and control – Part 1: Generic specification | reference published (presumption of conformity) |
| EN 50288-2-1:2013 Multi-element metallic cables used in analogue and digital communication and control – Part 2-1: Sectional specification for screened cables characterised up to 100 MHz – Horizontal and building backbone cables | reference published (presumption of conformity) |
| EN 50288-2-2:2013 Multi-element metallic cables used in analogue and digital communication and control – Part 2-2: Sectional specification for screened cables characterised up to 100 MHz – Work area and patch cord cables | reference published (presumption of conformity) |
| EN 50288-3-1:2013 Multi-element metallic cables used in analogue and digital communication and control – Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz – Horizontal and building backbone cables | reference published (presumption of conformity) |
| EN 50288-3-2:2013 Multi-element metallic cables used in analogue and digital communication and control – Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz – Work area and patch cord cables | reference published (presumption of conformity) |
| EN 50288-4-1:2013 Multi-element metallic cables used in analogue and digital communication and control – Part 4-1: Sectional specification for screened cables characterised up to 600 MHz – Horizontal and building backbone cables | reference published (presumption of conformity) |
| EN 50288-4-2:2013 Multi-element metallic cables used in analogue and digital communication and control – Part 4-2: Sectional specification for screened cables characterised up to 600 MHz – Work area and patch cord cables | reference published (presumption of conformity) |
| EN 50288-5-1:2013 Multi-element metallic cables used in analogue and digital communication and control – Part 5-1: Sectional specification for screened cables characterized up to 250 MHz – Horizontal and building backbone cables | reference published (presumption of conformity) |
| EN 50288-5-2:2013 Multi-element metallic cables used in analogue and digital communication and control – Part 5-2: Sectional specification for screened cables characterized up to 250 MHz – Work area and patch cord cables | reference published (presumption of conformity) |
| EN 50288-6-1:2013 Multi-element metallic cables used in analogue and digital communication and control – Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz – Horizontal and building backbone cables | reference published (presumption of conformity) |
| EN 50288-6-2:2013 Multi-element metallic cables used in analogue and digital communication and control – Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz – Work area and patch cord cables | reference published (presumption of conformity) |
| EN 50288-7:2005 Multi-element metallic cables used in analogue and digital communication and control – Part 7: Sectional specification for instrumentation and control cables | reference published (presumption of conformity) |
| EN 50288-8:2012 Multi-element metallic cables used in analogue and digital communication and control – Part 8: Specification for type 1 cables characterised up to 2 MHz | reference published (presumption of conformity) |
| EN 50288-9-1:2012 Multi-element metallic cables used in analogue and digital communication and control – Part 9-1: Sectional specification for screened cables characterised up to 1 000 MHz – Horizontal and building backbone cables | reference published (presumption of conformity) |
| EN 50288-9-2:2015 Multi-element metallic cables used in analogue and digital communication and control – Part 9-2: Sectional specification for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications | reference published (presumption of conformity) |
| EN 50288-10-1:2012 Multi-element metallic cables used in analogue and digital communication and control – Part 10-1: Sectional specification for screened cables characterized up to 500 MHz – Horizontal floor and building backbone cables | reference published (presumption of conformity) |
| EN 50288-10-2:2015 Multi-element metallic cables used in analogue and digital communication and control – Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications | reference published (presumption of conformity) |
| EN 50288-11-1:2012 Multi-element metallic cables used in analogue and digital communication and control – Part 11-1: Sectional specification for un-screened cables characterised up to 500 MHz – Horizontal and building backbone cables | reference published (presumption of conformity) |
| EN 50288-11-2:2015 Multi-element metallic cables used in analogue and digital communication and control – Part 11-2: Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications | reference published (presumption of conformity) |
| EN 50289-1-3:2001 Communication cables – Specifications for test methods – Part 1-3: Electrical test methods – Dielectric strength | reference published (presumption of conformity) |
| EN 50289-1-4:2001 Communication cables – Specifications for test methods – Part 1-4: Electrical test methods – Insulation resistance | reference published (presumption of conformity) |
| EN 50290-2-1:2005 Communication cables – Part 2-1: Common design rules and construction | reference published (presumption of conformity) |
| EN 50290-2-20:2001 Communication cables – Part 2-20: Common design rules and construction – General | reference published (presumption of conformity) |
| EN 50290-2-21:2001 Communication cables – Part 2-21: Common design rules and construction – PVC insulation compounds Amendments and corrigenda: EN 50290-2-21:2001/A1:2007/AC:2016, EN 50290-2-21:2001/A1:2007, EN 50290-2-21:2001/AC:2003 | reference published (presumption of conformity) |
| EN 50290-2-22:2001 Communication cables – Part 2-22: Common design rules and construction – PVC sheathing compounds Amendments and corrigenda: EN 50290-2-22:2001/A1:2007 | reference published (presumption of conformity) |
| EN 50290-2-23:2013 Communication cables – Part 2-23: Common design rules and construction – Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables | reference published (presumption of conformity) |
| EN 50290-2-24:2002 Communication cables – Part 2-24: Common design rules and construction – PE sheathing Amendments and corrigenda: EN 50290-2-24:2002/A1:2008 | reference published (presumption of conformity) |
| EN 50290-2-25:2013 Communication cables – Part 2-25: Common design rules and construction – Polypropylene insulation compounds | reference published (presumption of conformity) |
| EN 50290-2-26:2002 Communication cables – Part 2-26: Common design rules and construction – Halogen free flame retardant insulation compounds Amendments and corrigenda: EN 50290-2-26:2002/A1:2007 | reference published (presumption of conformity) |
| EN 50290-2-27:2002 Communication cables – Part 2-27: Common design rules and construction – Halogen free flame retardant thermoplastic sheathing compounds Amendments and corrigenda: EN 50290-2-27:2002/A1:2007, EN 50290-2-27:2002/A1:2007/AC:2010 | reference published (presumption of conformity) |
| EN 50290-2-28:2002 Communication cables – Part 2-28: Common design rules and construction – Filling compounds for filled cables | reference published (presumption of conformity) |
| EN 50290-2-29:2002 Communication cables – Part 2-29: Common design rules and construction – Cross-linked PE insulation compounds | reference published (presumption of conformity) |
| EN 50290-2-30:2002 Communication cables – Part 2-30: Common design rules and construction – Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing | reference published (presumption of conformity) |
| EN 50290-4-1:2014 Communication cables – Part 4-1: General considerations for the use of cables – Environmental conditions and safety aspects | reference published (presumption of conformity) |
| EN 50290-4-2:2014 Communication cables – Part 4-2: General considerations for the use of cables – Guide to use | reference published (presumption of conformity) |
| EN 50363-0:2011 Insulating, sheathing and covering materials for low-voltage energy cables – Part 0: General introduction | reference withdrawn as of 13.6.2025 |
| EN 50363-1:2005 Insulating, sheathing and covering materials for low voltage energy cables – Part 1: Cross-linked elastomeric insulating compounds | reference withdrawn as of 13.6.2025 |
| EN 50363-2-1:2005 Insulating, sheathing and covering materials for low voltage energy cables – Part 2-1: Cross-linked elastomeric sheathing compounds Amendments and corrigenda: EN 50363-2-1:2005/A1:2011 | reference withdrawn as of 13.6.2025 |
| EN 50363-2-2:2005 Insulating, sheathing and covering materials for low voltage energy cables – Part 2-2: Cross-linked elastomeric covering compounds | reference withdrawn as of 13.6.2025 |
| EN 50363-3:2005 Insulating, sheathing and covering materials for low voltage energy cables – Part 3: PVC insulating compounds Amendments and corrigenda: EN 50363-3:2005/A1:2011 | reference withdrawn as of 13.6.2025 |
| EN 50363-4-1:2005 Insulating, sheathing and covering materials for low voltage energy cables – Part 4-1: PVC sheathing compounds | reference withdrawn as of 13.6.2025 |
| EN 50363-4-2:2005 Insulating, sheathing and covering materials for low voltage energy cables – Part 4-2: PVC covering compounds | reference withdrawn as of 13.6.2025 |
| EN 50363-5:2005 Insulating, sheathing and covering materials for low voltage energy cables – Part 5: Halogen-free, cross-linked insulating compounds Amendments and corrigenda: EN 50363-5:2005/A1:2011 | reference withdrawn as of 13.6.2025 |
| EN 50363-6:2005 Insulating, sheathing and covering materials for low voltage energy cables – Part 6: Halogen-free, cross-linked sheathing compounds Amendments and corrigenda: EN 50363-6:2005/A1:2011 | reference withdrawn as of 13.6.2025 |
| EN 50363-7:2005 Insulating, sheathing and covering materials for low voltage energy cables – Part 7: Halogen-free, thermoplastic insulating compounds | reference withdrawn as of 13.6.2025 |
| EN 50363-8:2005 Insulating, sheathing and covering materials for low voltage energy cables – Part 8: Halogen-free, thermoplastic sheathing compounds Amendments and corrigenda: EN 50363-8:2005/A1:2011 | reference withdrawn as of 13.6.2025 |
| EN 50363-9-1:2005 Insulating, sheathing and covering materials for low voltage energy cables – Part 9-1: Miscellaneous insulating compounds – Cross-linked polyvinyl chloride (XLPVC) | reference withdrawn as of 13.6.2025 |
| EN 50363-10-1:2005 Insulating, sheathing and covering materials for low voltage energy cables – Part 10-1: Miscellaneous sheathing compounds – Cross-linked polyvinyl chloride (XLPVC) | reference withdrawn as of 13.6.2025 |
| EN 50363-10-2:2005 Insulating, sheathing and covering materials for low voltage energy cables – Part 10-2: Miscellaneous sheathing compounds – Thermoplastic polyurethane | reference withdrawn as of 13.6.2025 |
| EN 50364:2010 Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications | reference published (presumption of conformity) |
| EN 50369:2005 Liquid tight sheathing systems for cable management | reference published (presumption of conformity) |
| EN 50395:2005 Electrical test methods for low voltage energy cables Amendments and corrigenda: EN 50395:2005/A1:2011 | reference withdrawn as of 13.6.2025 |
| EN 50396:2005 Non electrical test methods for low voltage energy cables Amendments and corrigenda: EN 50396:2005/A1:2011 | reference withdrawn as of 13.6.2025 |
| EN 50406-1:2004 End user multi-pair cables used in high bit rate telecommunication networks – Part 1: Aerial cables | reference published (presumption of conformity) |
| EN 50406-2:2004 End user multi-pair cables used in high bit rate telecommunication networks – Part 2: Duct and buried cables | reference published (presumption of conformity) |
| EN 50407-1:2004 Multi-pair cables used in high bit rate digital access telecommunication networks – Part 1: Outdoor cables | reference published (presumption of conformity) |
| EN 50407-3:2014 Multi-pair cables used in high bit rate digital access telecommunications networks – Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP | reference published (presumption of conformity) |
| EN 50428:2005 Switches for household and similar fixed electrical installations – Collateral standard – Switches and related accessories for use in home and building electronic systems (HBES) Amendments and corrigenda: EN 50428:2005/A1:2007, EN 50428:2005/A2:2009 | reference published (presumption of conformity) |
| EN 50441-1:2012 Cables for indoor residential telecommunication installations – Part 1: Unscreened cables – Grade 1 | reference published (presumption of conformity) |
| EN 50441-2:2012 Cables for indoor residential telecommunication installations – Part 2: Screened cables – Grade 1 | reference published (presumption of conformity) |
| EN 50441-3:2006 Cables for indoor residential telecommunication installations – Part 3: Screened cables – Grade 3 | reference published (presumption of conformity) |
| EN 50441-4:2012 Cables for indoor residential telecommunication installations – Part 4: Cables up to 1 200 MHz – Grade 3 | reference published (presumption of conformity) |
| EN 50445:2008 Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz – 300 GHz) | reference published (presumption of conformity) |
| EN 50491-4-1:2012 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) | reference published (presumption of conformity) |
| EN 50491-6-1:2014 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 6-1: HBES installations – Installation and planning | reference published (presumption of conformity) |
| EN 50497:2007 Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables | reference withdrawn as of 13.6.2025 |
| EN 50520:2020 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations Amendments and corrigenda: EN 50520:2020/A1:2021 | reference published (presumption of conformity) |
| EN 50525-1:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 1: General requirements | reference published (presumption of conformity) |
| EN 50525-2-11:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) – Part 2-11: Cables for general applications – Flexible cables with thermoplastic PVC insulation | reference published (presumption of conformity) |
| EN 50525-2-12:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) – Part 2-12: Cables for general applications – Cables with thermoplastic PVC insulation for extensible leads | reference published (presumption of conformity) |
| EN 50525-2-21:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) – Part 2-21: Cables for general applications – Flexible cables with crosslinked elastomeric insulation Amendments and corrigenda: EN 50525-2-21:2011/AC:2013 | reference published (presumption of conformity) |
| EN 50525-2-22:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-22: Cables for general applications – High flexibility braided cables with crosslinked elastomeric insulation | reference published (presumption of conformity) |
| EN 50525-2-31:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-31: Cables for general applications – Single core non-sheathed cables with thermoplastic PVC insulation | reference published (presumption of conformity) |
| EN 50525-2-41:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-41: Cables for general applications – Single core cables with crosslinked silicone rubber insulation | reference published (presumption of conformity) |
| EN 50525-2-42:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-42: Cables for general applications – Single core non-sheathed cables with crosslinked EVA insulation | reference published (presumption of conformity) |
| EN 50525-2-51:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-51: Cables for general applications – Oil resistant control cables with thermoplastic PVC insulation | reference published (presumption of conformity) |
| EN 50525-2-71:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-71: Cables for general applications – Flat tinsel cables (cords) with thermoplastic PVC insulation | reference published (presumption of conformity) |
| EN 50525-2-72:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-72: Cables for general applications – Flat divisible cables (cords) with thermoplastic PVC insulation | reference published (presumption of conformity) |
| EN 50525-2-81:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-81: Cables for general applications – Cables with crosslinked elastomeric covering for arc welding | reference published (presumption of conformity) |
| EN 50525-2-82:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-82: Cables for general applications – Cables with crosslinked elastomeric insulation for decorative chains | reference published (presumption of conformity) |
| EN 50525-2-83:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 2-83: Cables for general applications – Multicore cables with crosslinked silicone rubber insulation | reference published (presumption of conformity) |
| EN 50525-3-11:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 3-11: Cables with special fire performance – Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke | reference published (presumption of conformity) |
| EN 50525-3-21:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 3-21: Cables with special fire performance – Flexible cables with halogen-free crosslinked insulation, and low emission of smoke Amendments and corrigenda: EN 50525-3-21:2011/AC:2013 | reference published (presumption of conformity) |
| EN 50525-3-31:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 3-31: Cables with special fire performance – Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke | reference published (presumption of conformity) |
| EN 50525-3-41:2011 Electric cables – Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) – Part 3-41: Cables with special fire performance – Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke | reference published (presumption of conformity) |
| EN 50539-11:2013 Low-voltage surge protective devices – Surge protective devices for specific application including d.c. – Part 11: Requirements and tests for SPDs in photovoltaic applications Amendments and corrigenda: EN 50539-11:2013/A1:2014 | reference published (presumption of conformity) |
| EN 50550:2011 Power frequency overvoltage protective device for household and similar applications (POP) Amendments and corrigenda: EN 50550:2011/AC:2012, EN 50550:2011/A1:2014 | reference published (presumption of conformity) |
| EN 50556:2011 Road traffic signal systems | reference published (presumption of conformity) |
| EN 50565-1:2014 Electric cables – Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) – Part 1: General guidance | reference withdrawn as of 13.6.2025 |
| EN 50565-2:2014 Electric cables – Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) – Part 2: Specific guidance related to EN 50525 cable types | reference withdrawn as of 13.6.2025 |
| EN 50615:2015 Household and similar electrical appliances – Safety – Particular requirements for devices for fire prevention and suppression for electric hobs (cooktops) | reference published (presumption of conformity) |
| EN 50618:2014 Electric cables for photovoltaic systems | reference published (presumption of conformity) |
| EN 50620:2017 Electric cables – Charging cables for electric vehicles Amendments and corrigenda: EN 50620:2017/A1:2019 | reference published (presumption of conformity) |
| EN 50620:2017 Electric cables – Charging cables for electric vehicles Amendments and corrigenda: EN 50620:2017/A1:2019, EN 50620:2017/A2:2024 | reference published (presumption of conformity) |
| EN 50626-1:2023 Conduit systems buried underground for the protection and management of insulated electrical cables or communication cables – Part 1: General requirements | reference published (presumption of conformity) |
| EN 50626-2:2023 Conduit systems buried underground for the protection and management of insulated electrical cables or communication cables – Part 2: Polyethylene (PE), Polypropylene (PP) or Unplasticized poly(vinyl chloride) (PVC-U) conduit systems – Requirements for solid wall conduits, fittings and the system used in special applications | reference published (presumption of conformity) |
| EN 50689:2021 Safety of laser products – Particular Requirements for Consumer Laser Products | reference published (presumption of conformity) |
| EN 60034-1:2010 Rotating electrical machines – Part 1: Rating and performance Amendments and corrigenda: EN 60034-1:2010/AC:2010 | reference published (presumption of conformity) |
| EN 60034-5:2001 Rotating electrical machines – Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) – Classification Amendments and corrigenda: EN 60034-5:2001/A1:2007 | reference published (presumption of conformity) |
| EN 60034-6:1993 Rotating electrical machines – Part 6: Methods of cooling (IC Code)#IEC 60034-6:1991 | reference published (presumption of conformity) |
| EN 60034-7:1993 Rotating electrical machines – Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) Amendments and corrigenda: EN 60034-7:1993/A1:2001 | reference published (presumption of conformity) |
| EN 60034-8:2007 Rotating electrical machines – Part 8: Terminal markings and direction of rotation Amendments and corrigenda: EN 60034-8:2007/A1:2014 | reference published (presumption of conformity) |
| EN 60034-9:2005 Rotating electrical machines – Part 9: Noise limits Amendments and corrigenda: EN 60034-9:2005/A1:2007 | reference published (presumption of conformity) |
| EN 60034-11:2004 Rotating electrical machines – Part 11: Thermal protection | reference published (presumption of conformity) |
| EN 60034-12:2002 Rotating electrical machines – Part 12: Starting performance of single-speed three-phase cage induction motors Amendments and corrigenda: EN 60034-12:2002/A1:2007 | reference published (presumption of conformity) |
| EN 60034-14:2004 Rotating electrical machines – Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher – Measurement, evaluation and limits of vibration severity Amendments and corrigenda: EN 60034-14:2004/A1:2007 | reference published (presumption of conformity) |
| EN 60051-1:1998 Direct acting indicating analogue electrical measuring instruments and their accessories – Part 1: Definitions and general requirements common to all parts | reference published (presumption of conformity) |
| EN 60051-2:1989 Direct acting indicating analogue electrical measuring instruments and their accessories – Part 2: Special requirements for ammeters and voltmeters | reference published (presumption of conformity) |
| EN 60051-3:1989 Direct acting indicating analogue electrical measuring instruments and their accessories – Part 3: Special requirements for wattmeters and varmeters Amendments and corrigenda: EN 60051-3:1989/A1:1995 | reference published (presumption of conformity) |
| EN 60051-4:1989 Direct acting indicating analogue electrical measuring instruments and their accessories – Part 4: Special requirements for frequency meters | reference published (presumption of conformity) |
| EN 60051-5:1989 Direct acting indicating analogue electrical measuring instruments and their accessories – Part 5: Special requirements for phase meters, power factor meters and synchroscopes | reference published (presumption of conformity) |
| EN 60051-6:1989 Direct acting indicating analogue electrical measuring instruments and their accessories – Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters | reference published (presumption of conformity) |
| EN 60051-7:1989 Direct acting indicating analogue electrical measuring instruments and their accessories – Part 7: Special requirements for multi-function instruments | reference published (presumption of conformity) |
| EN 60051-8:1989 Direct acting indicating analogue electrical measuring instruments and their accessories – Part 8: Special requirements for accessories | reference published (presumption of conformity) |
| EN 60051-9:1989 Direct acting indicating analogue electrical-measuring instruments and their accessories – Part 9: Recommended test methods Amendments and corrigenda: EN 60051-9:1989/A1:1995, EN 60051-9:1989/A2:1995 | reference published (presumption of conformity) |
| EN 60110-1:1998 Power capacitors for induction heating installations – Part 1: General | reference published (presumption of conformity) |
| EN 60127-1:2006 Miniature fuses – Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links Amendments and corrigenda: EN 60127-1:2006/A1:2011, EN 60127-1:2006/A2:2015 | reference published (presumption of conformity) |
| EN 60127-2:2014 Miniature fuses – Part 2: Cartridge fuse-links | reference published (presumption of conformity) |
| EN 60127-3:1996 Miniature fuses – Part 3: Sub-miniature fuse-links Amendments and corrigenda: EN 60127-3:1996/A2:2003, EN 60127-3:1996/AC:1996 | reference published (presumption of conformity) |
| EN 60127-4:2005 Miniature fuses – Part 4: Universal modular fuse-links (UMF) – Through-hole and surface mount types Amendments and corrigenda: EN 60127-4:2005/A1:2009, EN 60127-4:2005/A2:2013 | reference published (presumption of conformity) |
| EN 60127-6:2014 Miniature fuses – Part 6: Fuse-holders for miniature fuse-links | reference published (presumption of conformity) |
| EN 60127-7:2016 Miniature fuses – Part 7: Miniature fuse-links for special applications | reference published (presumption of conformity) |
| EN 60143-2:2013 Series capacitors for power systems – Part 2: Protective equipment for series capacitor banks | reference published (presumption of conformity) |
| EN 60155:1995 Glow-starters for fluorescent lamps Amendments and corrigenda: EN 60155:1995/A1:1995, EN 60155:1995/A2:2007 | reference published (presumption of conformity) |
| EN 60204-1:2018 Safety of machinery – Electrical equipment of machines – Part 1: General requirements | reference published (presumption of conformity) |
| EN 60204-32:2008 Safety of machinery – Electrical equipment of machines – Part 32: Requirements for hoisting machines | reference published (presumption of conformity) |
| EN 60215:1989 Safety requirements for radio transmitting equipment Amendments and corrigenda: EN 60215:1989/A1:1992, EN 60215:1989/A2:1994 | reference published (presumption of conformity) |
| EN 60228:2005 Conductors of insulated cables Amendments and corrigenda: EN 60228:2005/AC:2005 | reference withdrawn as of 13.6.2025 |
| EN 60252-1:2011 AC motor capacitors – Part 1: General – Performance, testing and rating – Safety requirements – Guidance for installation and operation Amendments and corrigenda: EN 60252-1:2011/A1:2013 | reference published (presumption of conformity) |
| EN 60252-2:2011 AC motor capacitors – Part 2: Motor start capacitors Amendments and corrigenda: EN 60252-2:2011/A1:2013 | reference published (presumption of conformity) |
| EN 60255-27:2014 Measuring relays and protection equipment – Part 27: Product safety requirements | reference published (presumption of conformity) |
| EN 60269-1:2007 Low-voltage fuses – Part 1: General requirements Amendments and corrigenda: EN 60269-1:2007/A1:2009, EN 60269-1:2007/A2:2014 | reference published (presumption of conformity) |
| EN 60269-4:2009 Low-voltage fuses – Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices Amendments and corrigenda: EN 60269-4:2009/A1:2012 | reference published (presumption of conformity) |
| EN 60269-6:2011 Low-voltage fuses – Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems | reference published (presumption of conformity) |
| EN 60309-1:1999 Plugs, socket-outlets and couplers for industrial purposes – Part 1: General requirements Amendments and corrigenda: EN 60309-1:1999/A1:2007, EN 60309-1:1999/A2:2012, EN 60309-1:1999/A1:2007/AC:2014 | reference published (presumption of conformity) |
| EN 60309-2:1999 Plugs, socket-outlets and couplers for industrial purposes – Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories Amendments and corrigenda: EN 60309-2:1999/A1:2007, EN 60309-2:1999/A2:2012 | reference published (presumption of conformity) |
| EN 60309-4:2007 Plugs, socket-outlets and couplers for industrial purposes – Part 4: Switched socket-outlets and connectors with or without interlock Amendments and corrigenda: EN 60309-4:2007/A1:2012 | reference published (presumption of conformity) |
| EN 60320-2-1:2000 Appliance couplers for household and similar general purposes – Part 2-1: Sewing machine couplers | reference published (presumption of conformity) |
| EN 60320-2-2:1998 Appliance couplers for household and similar general purposes – Part 2-2: Interconnection couplers for household and similar equipment | reference published (presumption of conformity) |
| EN 60332-1-1:2004 Tests on electric and optical fibre cables under fire conditions – Part 1-1: Test for vertical flame propagation for a single insulated wire or cable – Apparatus Amendments and corrigenda: EN 60332-1-1:2004/A1:2015 | reference withdrawn as of 13.6.2025 |
| EN 60332-1-2:2004 Tests on electric and optical fibre cables under fire conditions – Part 1-2: Test for vertical flame propagation for a single insulated wire or cable – Procedure for 1 kW pre-mixed flame Amendments and corrigenda: EN 60332-1-2:2004/A1:2015 | reference withdrawn as of 13.6.2025 |
| EN 60332-1-3:2004 Tests on electric and optical fibre cables under fire conditions – Part 1-3: Test for vertical flame propagation for a single insulated wire or cable – Procedure for determination of flaming droplets/particles Amendments and corrigenda: EN 60332-1-3:2004/A1:2015 | reference withdrawn as of 13.6.2025 |
| EN 60332-2-1:2004 Tests on electric and optical fibre cables under fire conditions – Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable – Apparatus | reference withdrawn as of 13.6.2025 |
| EN 60332-2-2:2004 Tests on electric and optical fibre cables under fire conditions – Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable – Procedure for diffusion flame | reference withdrawn as of 13.6.2025 |
| EN 60332-3-10:2009 Tests on electric and optical fibre cables under fire conditions – Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables – Apparatus | reference withdrawn as of 13.6.2025 |
| EN 60332-3-21:2009 Tests on electric and optical fibre cables under fire conditions – Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category A F/R | reference withdrawn as of 13.6.2025 |
| EN 60332-3-22:2009 Tests on electric and optical fibre cables under fire conditions – Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category A | reference withdrawn as of 13.6.2025 |
| EN 60332-3-23:2009 Tests on electric and optical fibre cables under fire conditions – Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category B | reference withdrawn as of 13.6.2025 |
| EN 60332-3-24:2009 Tests on electric and optical fibre cables under fire conditions – Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category C | reference withdrawn as of 13.6.2025 |
| EN 60332-3-25:2009 Tests on electric and optical fibre cables under fire conditions – Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category D | reference withdrawn as of 13.6.2025 |
| EN 60335-1:2012 Household and similar electrical appliances – Safety – Part 1: General requirements Amendments and corrigenda: EN 60335-1:2012/AC:2014, EN 60335-1:2012/A11:2014, EN 60335-1:2012/A13:2017, EN 60335-1:2012/A1:2019, EN 60335-1:2012/A14:2019, EN 60335-1:2012/A2:2019, EN 60335-1:2012/A15:2021 | reference published (presumption of conformity) |
| EN 60335-1:2012 Household and similar electrical appliances – Safety – Part 1: General requirements Amendments and corrigenda: EN 60335-1:2012/AC:2014, EN 60335-1:2012/A11:2014, EN 60335-1:2012/A13:2017, EN 60335-1:2012/A1:2019, EN 60335-1:2012/A14:2019, EN 60335-1:2012/A2:2019, EN 60335-1:2012/A15:2021 | reference published (presumption of conformity) |
| EN 60335-2-2:2010 Household and similar electrical appliances – Safety – Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances Amendments and corrigenda: EN 60335-2-2:2010/A11:2012, EN 60335-2-2:2010/A1:2013 | reference published (presumption of conformity) |
| EN 60335-2-3:2016 Household and similar electrical appliances – Safety – Part 2-3: Particular requirements for electric irons Amendments and corrigenda: EN 60335-2-3:2016/A1:2020 | reference published (presumption of conformity) |
| EN 60335-2-4:2010 Household and similar electrical appliances – Safety – Part 2-4: Particular requirements for spin extractors Amendments and corrigenda: EN 60335-2-4:2010/A1:2015, EN 60335-2-4:2010/A11:2018, EN 60335-2-4:2010/A2:2019 | reference published (presumption of conformity) |
| EN 60335-2-5:2015 Household and similar electrical appliances – Safety – Part 2-5: Particular requirements for dishwashers Amendments and corrigenda: EN 60335-2-5:2015/A11:2019, EN 60335-2-5:2015/A1:2020 | reference published (presumption of conformity) |
| EN 60335-2-6:2015 Household and similar electrical appliances – Safety – Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances Amendments and corrigenda: EN 60335-2-6:2015/A11:2020 | reference published (presumption of conformity) |
| EN 60335-2-7:2010 Household and similar electrical appliances – Safety – Part 2-7: Particular requirements for washing machines Amendments and corrigenda: EN 60335-2-7:2010/A11:2013, EN 60335-2-7:2010/A1:2013, EN 60335-2-7:2010/A2:2019 | reference published (presumption of conformity) |
| EN 60335-2-8:2015 Household and similar electrical appliances – Safety – Part 2-8: Particular requirements for shavers, hair clippers and similar appliances Amendments and corrigenda: EN 60335-2-8:2015/A1:2016 | reference published (presumption of conformity) |
| EN 60335-2-9:2003 Household and similar electrical appliances – Safety – Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances Amendments and corrigenda: EN 60335-2-9:2003/A1:2004, EN 60335-2-9:2003/A12:2007, EN 60335-2-9:2003/A13:2010, EN 60335-2-9:2003/A2:2006, EN 60335-2-9:2003/A13:2010/AC:2011, EN 60335-2-9:2003/A13:2010/AC:2012 | reference published (presumption of conformity) |
| EN 60335-2-10:2003 Household and similar electrical appliances – Safety – Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines Amendments and corrigenda: EN 60335-2-10:2003/A1:2008 | reference published (presumption of conformity) |
| EN 60335-2-11:2010 Household and similar electrical appliances – Safety – Part 2-11: Particular requirements for tumble dryers Amendments and corrigenda: EN 60335-2-11:2010/A11:2012, EN 60335-2-11:2010/A1:2015 | reference withdrawn as of 17.9.2024 |
| EN 60335-2-12:2003 Household and similar electrical appliances – Safety – Part 2-12: Particular requirements for warming plates and similar appliances Amendments and corrigenda: EN 60335-2-12:2003/A1:2008, EN 60335-2-12:2003/A11:2019, EN 60335-2-12:2003/A2:2019 | reference published (presumption of conformity) |
| EN 60335-2-13:2010 Household and similar electrical appliances – Safety – Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances Amendments and corrigenda: EN 60335-2-13:2010/A11:2012, EN 60335-2-13:2010/A1:2019 | reference published (presumption of conformity) |
| EN 60335-2-15:2016 Household and similar electrical appliances – Safety – Part 2-15: Particular requirements for appliances for heating liquids Amendments and corrigenda: EN 60335-2-15:2016/A11:2018, EN 60335-2-15:2016/A1:2021, EN 60335-2-15:2016/A12:2021, EN 60335-2-15:2016/A2:2021 | reference published (presumption of conformity) |
| EN 60335-2-16:2003 Household and similar electrical appliances – Safety – Part 2-16: Particular requirements for food waste disposers Amendments and corrigenda: EN 60335-2-16:2003/A1:2008, EN 60335-2-16:2003/A2:2012, EN 60335-2-16:2003/A11:2018 | reference published (presumption of conformity) |
| EN 60335-2-17:2013 Household and similar electrical appliances – Safety – Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances Amendments and corrigenda: EN 60335-2-17:2013/A11:2019, EN 60335-2-17:2013/A1:2020, EN 60335-2-17:2013/A2:2021 | reference published (presumption of conformity) |
| EN 60335-2-21:2021 Household and similar electrical appliances – Safety – Part 2-21: Particular requirements for storage water heaters Amendments and corrigenda: EN 60335-2-21:2021/A1:2021 | reference published (presumption of conformity) |
| EN 60335-2-23:2003 Household and similar electrical appliances – Safety – Part 2-23: Particular requirements for appliances for skin or hair care Amendments and corrigenda: EN 60335-2-23:2003/A11:2010/AC:2012, EN 60335-2-23:2003/A11:2010, EN 60335-2-23:2003/A1:2008, EN 60335-2-23:2003/A2:2015 | reference published (presumption of conformity) |
| EN 60335-2-24:2010 Household and similar electrical appliances – Safety – Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers Amendments and corrigenda: EN 60335-2-24:2010/A1:2019, EN 60335-2-24:2010/A11:2020, EN 60335-2-24:2010/A2:2019 | reference withdrawn as of 13.6.2025 |
| EN 60335-2-26:2003 Household and similar electrical appliances – Safety – Part 2-26: Particular requirements for clocks Amendments and corrigenda: EN 60335-2-26:2003/A1:2008 | reference published (presumption of conformity) |
| EN 60335-2-27:2013 Household and similar electrical appliances – Safety – Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation Amendments and corrigenda: EN 60335-2-27:2013/A1:2020, EN 60335-2-27:2013/A2:2020, EN 60335-2-27:2013/AC:2021-11 | reference published (presumption of conformity) |
| EN 60335-2-27:2013 Household and similar electrical appliances – Safety – Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation Amendments and corrigenda: EN 60335-2-27:2013/A1:2020, EN 60335-2-27:2013/A2:2020, EN 60335-2-27:2013/AC:2021-11 | reference published (presumption of conformity) |
| EN 60335-2-28:2003 Household and similar electrical appliances – Safety – Part 2-28: Particular requirements for sewing machines Amendments and corrigenda: EN 60335-2-28:2003/A1:2008, EN 60335-2-28:2003/A11:2018 | reference published (presumption of conformity) |
| EN 60335-2-29:2021 Household and similar electrical appliances – Safety – Part 2-29: Particular requirements for battery chargers Amendments and corrigenda: EN 60335-2-29:2021/A1:2021 | reference published (presumption of conformity) |
| EN 60335-2-30:2009 Household and similar electrical appliances – Safety – Part 2-30: Particular requirements for room heaters Amendments and corrigenda: EN 60335-2-30:2009/A11:2012, EN 60335-2-30:2009/AC:2010, EN 60335-2-30:2009/AC:2014, EN 60335-2-30:2009/A1:2020, EN 60335-2-30:2009/A12:2020, EN 60335-2-30:2009/A13:2022, EN 60335-2-30:2009/A2:2022 | reference published (presumption of conformity) |
| EN 60335-2-30:2009 Household and similar electrical appliances – Safety – Part 2-30: Particular requirements for room heaters Amendments and corrigenda: EN 60335-2-30:2009/A11:2012, EN 60335-2-30:2009/AC:2010, EN 60335-2-30:2009/AC:2014, EN 60335-2-30:2009/A1:2020, EN 60335-2-30:2009/A12:2020 | reference withdrawn as of 17.9.2024 |
| EN 60335-2-31:2014 Household and similar electrical appliances – Safety – Part 2-31: Particular requirements for range hoods and other cooking fume extractors | reference published (presumption of conformity) |
| EN 60335-2-32:2003 Household and similar electrical appliances – Safety – Part 2-32: Particular requirements for massage appliances Amendments and corrigenda: EN 60335-2-32:2003/A1:2008, EN 60335-2-32:2003/A2:2015 | reference published (presumption of conformity) |
| EN 60335-2-34:2013 Household and similar electrical appliances – Safety – Part 2-34: Particular requirements for motor-compressors | reference published (presumption of conformity) |
| EN 60335-2-35:2016 Household and similar electrical appliances – Safety – Part 2-35: Particular requirements for instantaneous water heaters Amendments and corrigenda: EN 60335-2-35:2016/A1:2019, EN 60335-2-35:2016/A2:2021 | reference published (presumption of conformity) |
| EN 60335-2-36:2002 Household and similar electrical appliances – Safety – Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements Amendments and corrigenda: EN 60335-2-36:2002/A1:2004, EN 60335-2-36:2002/A11:2012, EN 60335-2-36:2002/A2:2008, EN 60335-2-36:2002/AC:2007 | reference published (presumption of conformity) |
| EN 60335-2-37:2002 Household and similar electrical appliances – Safety – Part 2-37: Particular requirements for commercial electric deep fat fryers Amendments and corrigenda: EN 60335-2-37:2002/A1:2008, EN 60335-2-37:2002/A11:2012, EN 60335-2-37:2002/AC:2007 | reference published (presumption of conformity) |
| EN 60335-2-38:2003 Household and similar electrical appliances – Safety – Part 2-38: Particular requirements for commercial electric griddles and griddle grills Amendments and corrigenda: EN 60335-2-38:2003/A1:2008, EN 60335-2-38:2003/AC:2007 | reference published (presumption of conformity) |
| EN 60335-2-39:2003 Household and similar electrical appliances – Safety – Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans Amendments and corrigenda: EN 60335-2-39:2003/A1:2004, EN 60335-2-39:2003/A2:2008, EN 60335-2-39:2003/AC:2007 | reference published (presumption of conformity) |
| EN 60335-2-40:2003 Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers Amendments and corrigenda: EN 60335-2-40:2003/A11:2004, EN 60335-2-40:2003/A12:2005, EN 60335-2-40:2003/A1:2006, EN 60335-2-40:2003/A13:2012/AC:2013, EN 60335-2-40:2003/A13:2012, EN 60335-2-40:2003/A2:2009, EN 60335-2-40:2003/AC:2006, EN 60335-2-40:2003/AC:2010 | reference published (presumption of conformity) |
| EN 60335-2-42:2003 Household and similar electrical appliances – Safety – Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens Amendments and corrigenda: EN 60335-2-42:2003/A1:2008, EN 60335-2-42:2003/A11:2012, EN 60335-2-42:2003/AC:2007 | reference published (presumption of conformity) |
| EN 60335-2-44:2002 Household and similar electrical appliances – Safety – Part 2-44: Particular requirements for ironers Amendments and corrigenda: EN 60335-2-44:2002/A1:2008, EN 60335-2-44:2002/A2:2012 | reference published (presumption of conformity) |
| EN 60335-2-45:2002 Household and similar electrical appliances – Safety – Part 2-45: Particular requirements for portable heating tools and similar appliances Amendments and corrigenda: EN 60335-2-45:2002/A1:2008, EN 60335-2-45:2002/A2:2012 | reference published (presumption of conformity) |
| EN 60335-2-47:2003 Household and similar electrical appliances – Safety – Part 2-47: Particular requirements for commercial electric boiling pans Amendments and corrigenda: EN 60335-2-47:2003/A1:2008, EN 60335-2-47:2003/A11:2012, EN 60335-2-47:2003/AC:2007, EN 60335-2-47:2003/A2:2019 | reference published (presumption of conformity) |
| EN 60335-2-48:2003 Household and similar electrical appliances – Safety – Part 2-48: Particular requirements for commercial electric grillers and toasters Amendments and corrigenda: EN 60335-2-48:2003/A1:2008, EN 60335-2-48:2003/A11:2012, EN 60335-2-48:2003/AC:2007, EN 60335-2-48:2003/A2:2019 | reference published (presumption of conformity) |
| EN 60335-2-49:2003 Household and similar electrical appliances – Safety – Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm Amendments and corrigenda: EN 60335-2-49:2003/A1:2008, EN 60335-2-49:2003/A11:2012, EN 60335-2-49:2003/AC:2007, EN 60335-2-49:2003/A2:2019 | reference published (presumption of conformity) |
| EN 60335-2-50:2003 Household and similar electrical appliances – Safety – Part 2-50: Particular requirements for commercial electric bains-marie Amendments and corrigenda: EN 60335-2-50:2003/A1:2008, EN 60335-2-50:2003/AC:2007 | reference published (presumption of conformity) |
| EN 60335-2-52:2003 Household and similar electrical appliances – Safety – Part 2-52: Particular requirements for oral hygiene appliances Amendments and corrigenda: EN 60335-2-52:2003/A11:2010/AC:2012, EN 60335-2-52:2003/A11:2010, EN 60335-2-52:2003/A1:2008, EN 60335-2-52:2003/A12:2019 | reference published (presumption of conformity) |
| EN 60335-2-53:2011 Household and similar electrical appliances – Safety – Part 2-53: Particular requirements for sauna heating appliances and infrared cabins | reference published (presumption of conformity) |
| EN 60335-2-54:2008 Household and similar electrical appliances – Safety – Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam Amendments and corrigenda: EN 60335-2-54:2008/A11:2012/AC:2015, EN 60335-2-54:2008/A11:2012, EN 60335-2-54:2008/A1:2015, EN 60335-2-54:2008/A12:2021, EN 60335-2-54:2008/A2:2021 | reference published (presumption of conformity) |
| EN 60335-2-55:2003 Household and similar electrical appliances – Safety – Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds Amendments and corrigenda: EN 60335-2-55:2003/A1:2008, EN 60335-2-55:2003/A11:2018 | reference published (presumption of conformity) |
| EN 60335-2-56:2003 Household and similar electrical appliances – Safety – Part 2-56: Particular requirements for projectors and similar appliances Amendments and corrigenda: EN 60335-2-56:2003/A1:2008, EN 60335-2-56:2003/A2:2014 | reference published (presumption of conformity) |
| EN 60335-2-58:2005 Household and similar electrical appliances – Safety – Part 2-58: Particular requirements for commercial electric dishwashing machines | reference published (presumption of conformity) |
| EN 60335-2-59:2003 Household and similar electrical appliances – Safety – Part 2-59: Particular requirements for insect killers Amendments and corrigenda: EN 60335-2-59:2003/A1:2006, EN 60335-2-59:2003/A2:2009, EN 60335-2-59:2003/A11:2018 | reference published (presumption of conformity) |
| EN 60335-2-60:2003 Household and similar electrical appliances – Safety – Part 2-60: Particular requirements for whirlpool baths and whirlpool spas Amendments and corrigenda: EN 60335-2-60:2003/A1:2005, EN 60335-2-60:2003/A12:2010, EN 60335-2-60:2003/A11:2010, EN 60335-2-60:2003/A2:2008 | reference published (presumption of conformity) |
| EN 60335-2-61:2003 Household and similar electrical appliances – Safety – Part 2-61: Particular requirements for thermal-storage room heaters Amendments and corrigenda: EN 60335-2-61:2003/A1:2005, EN 60335-2-61:2003/A2:2008, EN 60335-2-61:2003/A11:2019, EN 60335-2-61:2003/A12:2021 | reference published (presumption of conformity) |
| EN 60335-2-62:2003 Household and similar electrical appliances – Safety – Part 2-62: Particular requirements for commercial electric rinsing sinks Amendments and corrigenda: EN 60335-2-62:2003/A1:2008, EN 60335-2-62:2003/AC:2007 | reference published (presumption of conformity) |
| EN 60335-2-65:2003 Household and similar electrical appliances – Safety – Part 2-65: Particular requirements for air-cleaning appliances Amendments and corrigenda: EN 60335-2-65:2003/A1:2008, EN 60335-2-65:2003/A11:2012 | reference published (presumption of conformity) |
| EN 60335-2-66:2003 Household and similar electrical appliances – Safety – Part 2-66: Particular requirements for water-bed heaters Amendments and corrigenda: EN 60335-2-66:2003/A1:2008, EN 60335-2-66:2003/A2:2012, EN 60335-2-66:2003/A11:2019 | reference published (presumption of conformity) |
| EN 60335-2-70:2002 Household and similar electrical appliances – Safety – Part 2-70: Particular requirements for milking machines | reference published (presumption of conformity) |
| EN 60335-2-71:2003 Household and similar electrical appliances – Safety – Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals Amendments and corrigenda: EN 60335-2-71:2003/A1:2007 | reference published (presumption of conformity) |
| EN 60335-2-73:2003 Household and similar electrical appliances – Safety – Part 2-73: Particular requirements for fixed immersion heaters Amendments and corrigenda: EN 60335-2-73:2003/A1:2006, EN 60335-2-73:2003/A2:2009, EN 60335-2-73:2003/A11:2021 | reference published (presumption of conformity) |
| EN 60335-2-74:2003 Household and similar electrical appliances – Safety – Part 2-74: Particular requirements for portable immersion heaters Amendments and corrigenda: EN 60335-2-74:2003/A1:2006, EN 60335-2-74:2003/A2:2009, EN 60335-2-74:2003/A11:2018 | reference published (presumption of conformity) |
| EN 60335-2-75:2004 Household and similar electrical appliances – Safety – Part 2-75: Particular requirements for commercial dispensing appliances and vending machines Amendments and corrigenda: EN 60335-2-75:2004/A11:2006, EN 60335-2-75:2004/A1:2005, EN 60335-2-75:2004/A12:2010, EN 60335-2-75:2004/A2:2008 | reference published (presumption of conformity) |
| EN 60335-2-78:2003 Household and similar electrical appliances – Safety – Part 2-78: Particular requirements for outdoor barbecues Amendments and corrigenda: EN 60335-2-78:2003/A1:2008, EN 60335-2-78:2003/A11:2020 | reference published (presumption of conformity) |
| EN 60335-2-80:2003 +6Household and similar electrical appliances – Safety – Part 2-80: Particular requirements for fans Amendments and corrigenda: EN 60335-2-80:2003/A1:2004, EN 60335-2-80:2003/A2:2009 | reference published (presumption of conformity) |
| EN 60335-2-81:2003 Household and similar electrical appliances – Safety – Part 2-81: Particular requirements for foot warmers and heating mats Amendments and corrigenda: EN 60335-2-81:2003/A1:2007, EN 60335-2-81:2003/A2:2012 | reference published (presumption of conformity) |
| EN 60335-2-82:2003 Household and similar electrical appliances – Safety – Part 2-82: Particular requirements for amusement machines and personal service machines Amendments and corrigenda: EN 60335-2-82:2003/A1:2008, EN 60335-2-82:2003/A2:2020 | reference published (presumption of conformity) |
| EN 60335-2-83:2002 Household and similar electrical appliances – Safety – Part 2-83: Particular requirements for heated gullies for roof drainage Amendments and corrigenda: EN 60335-2-83:2002/A1:2008 | reference published (presumption of conformity) |
| EN 60335-2-85:2003 Household and similar electrical appliances – Safety – Part 2-85: Particular requirements for fabric steamers Amendments and corrigenda: EN 60335-2-85:2003/A1:2008, EN 60335-2-85:2003/A11:2018, EN 60335-2-85:2003/A2:2020 | reference published (presumption of conformity) |
| EN 60335-2-86:2003 Household and similar electrical appliances – Safety – Part 2-86: Particular requirements for electric fishing machines Amendments and corrigenda: EN 60335-2-86:2003/A1:2005, EN 60335-2-86:2003/A11:2016, EN 60335-2-86:2003/A2:2016 | reference published (presumption of conformity) |
| EN 60335-2-87:2002 Household and similar electrical appliances – Safety – Part 2-87: Particular requirements for electrical animal-stunning equipment Amendments and corrigenda: EN 60335-2-87:2002/A1:2007, EN 60335-2-87:2002/A2:2019 | reference published (presumption of conformity) |
| EN 60335-2-88:2002 Household and similar electrical appliances – Safety – Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems | reference published (presumption of conformity) |
| EN 60335-2-90:2006 Household and similar electrical appliances – Safety – Part 2-90: Particular requirements for commercial microwave ovens Amendments and corrigenda: EN 60335-2-90:2006/A1:2010 | reference published (presumption of conformity) |
| EN 60335-2-97:2006 Household and similar electrical appliances – Safety – Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment Amendments and corrigenda: EN 60335-2-97:2006/A11:2008, EN 60335-2-97:2006/A12:2015, EN 60335-2-97:2006/A2:2010 | reference published (presumption of conformity) |
| EN 60335-2-98:2003 Household and similar electrical appliances – Safety – Part 2-98: Particular requirements for humidifiers Amendments and corrigenda: EN 60335-2-98:2003/A1:2005, EN 60335-2-98:2003/A2:2008, EN 60335-2-98:2003/A11:2019 | reference published (presumption of conformity) |
| EN 60335-2-99:2003 Household and similar electrical appliances – Safety – Part 2-99: Particular requirements for commercial electric hoods | reference published (presumption of conformity) |
| EN 60335-2-101:2002 Household and similar electrical appliances – Safety – Part 2-101: Particular requirements for vaporizers Amendments and corrigenda: EN 60335-2-101:2002/A1:2008, EN 60335-2-101:2002/A2:2014 | reference published (presumption of conformity) |
| EN 60335-2-102:2016 Household and similar electrical appliances – Safety – Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections | reference published (presumption of conformity) |
| EN 60335-2-106:2007 Household and similar electrical appliances – Safety – Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings | reference published (presumption of conformity) |
| EN 60335-2-108:2008 Household and similar electrical appliances – Safety – Part 2-108: Particular requirements for electrolysers | reference published (presumption of conformity) |
| EN 60335-2-109:2010 Household and similar electrical appliances – Safety – Part 2-109: Particular requirements for UV radiation water treatment appliances Amendments and corrigenda: EN 60335-2-109:2010/A1:2018, EN 60335-2-109:2010/A2:2018 | reference published (presumption of conformity) |
| EN 60358-1:2012 Coupling capacitors and capacitor dividers – Part 1: General rules Amendments and corrigenda: EN 60358-1:2012/AC:2013 | reference published (presumption of conformity) |
| EN 60360:1998 Standard method of measurement of lamp cap temperature rise | reference published (presumption of conformity) |
| EN 60399:2004 Barrel thread for lampholders with shade holder ring Amendments and corrigenda: EN 60399:2004/A1:2008 | reference published (presumption of conformity) |
| EN 60400:2017 Lampholders for tubular fluorescent lamps and starterholders Amendments and corrigenda: EN 60400:2017/A1:2021 | reference published (presumption of conformity) |
| EN 60423:2007 Conduit systems for cable management – Outside diameters of conduits for electrical installations and threads for conduits and fittings | reference published (presumption of conformity) |
| EN 60432-1:2000 Incandescent lamps – Safety specifications – Part 1: Tungsten filament lamps for domestic and similar general lighting purposes Amendments and corrigenda: EN 60432-1:2000/A1:2005, EN 60432-1:2000/A2:2012 | reference published (presumption of conformity) |
| EN 60432-2:2000 Incandescent lamps – Safety specifications – Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes Amendments and corrigenda: EN 60432-2:2000/A1:2005, EN 60432-2:2000/A2:2012 | reference published (presumption of conformity) |
| EN 60432-3:2013 Incandescent lamps – Safety specifications – Part 3: Tungsten-halogen lamps (non-vehicle) | reference published (presumption of conformity) |
| EN 60477:1997 Laboratory d.c. resistors Amendments and corrigenda: EN 60477:1997/A1:1997 | reference published (presumption of conformity) |
| EN 60477-2:1997 Laboratory resistors – Part 2: Laboratory a.c. resistors Amendments and corrigenda: EN 60477-2:1997/A1:1997 | reference published (presumption of conformity) |
| EN 60519-1:2015 Safety in installations for electroheating and electromagnetic processing – Part 1: General requirements | reference published (presumption of conformity) |
| EN 60519-2:2006 Safety in electroheat installations – Part 2: Particular requirements for resistance heating equipment | reference published (presumption of conformity) |
| EN 60519-3:2005 Safety in electroheat installations – Part 3: Particular requirements for induction and conduction heating and induction melting installations | reference published (presumption of conformity) |
| EN 60519-4:2013 Safety in electroheating installations – Part 4: Particular requirements for arc furnace installations | reference published (presumption of conformity) |
| EN 60519-6:2011 Safety in electroheat installations – Part 6: Specifications for safety in industrial microwave heating equipment | reference published (presumption of conformity) |
| EN 60519-7:2008 Safety in electroheat installations – Part 7: Particular requirements for installations with electron guns | reference published (presumption of conformity) |
| EN 60519-8:2005 Safety in electroheat installations – Part 8: Particular requirements for electroslag remelting furnaces | reference published (presumption of conformity) |
| EN 60519-9:2005 Safety in electroheat installations – Part 9: Particular requirements for high-frequency dielectric heating installations | reference published (presumption of conformity) |
| EN 60519-10:2013 Safety in electroheating installations – Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications | reference published (presumption of conformity) |
| EN 60519-12:2013 Safety in electroheating installations – Part 12: Particular requirements for infrared electroheating installations | reference published (presumption of conformity) |
| EN 60519-21:2009 Safety in electroheat installations – Part 21: Particular requirements for resistance heating equipment – Heating and melting glass equipment#IEC 60519-21:2008 | reference published (presumption of conformity) |
| EN 60523:1993 Direct-current potentiometers Amendments and corrigenda: EN 60523:1993/A2:1997 | reference published (presumption of conformity) |
| EN 60524:1993 Direct-current resistive volt ratio boxes Amendments and corrigenda: EN 60524:1993/A2:1997 | reference published (presumption of conformity) |
| EN 60529:1991 Degrees of protection provided by enclosures (IP Code)#IEC 60529:1989 Amendments and corrigenda: EN 60529:1991/A1:2000, EN 60529:1991/A2:2013, EN 60529:1991/AC:1993, EN 60529:1991/AC:2016-12, EN 60529:1991/A2:2013/AC:2019-02 | reference published (presumption of conformity) |
| EN 60564:1993 D.C. bridges for measuring resistance Amendments and corrigenda: EN 60564:1993/A2:1997 | reference published (presumption of conformity) |
| EN 60570:2003 Electrical supply track systems for luminaires Amendments and corrigenda: EN 60570:2003/A1:2018, EN 60570:2003/A2:2020 | reference published (presumption of conformity) |
| EN 60598-1:2015 Luminaires – Part 1: General requirements and tests Amendments and corrigenda: EN 60598-1:2015/AC:2015, EN 60598-1:2015/AC:2016, EN 60598-1:2015/AC:2017-05, EN 60598-1:2015/A1:2018 | reference withdrawn as of 11.7.2024 |
| EN 60598-2-1:1989 Luminaires – Part 2: Particular requirements – Section 1: Fixed general purpose luminaires | reference published (presumption of conformity) |
| EN 60598-2-2:2012 Luminaires – Part 2-2: Particular requirements – Recessed luminaires | reference published (presumption of conformity) |
| EN 60598-2-3:2003 Luminaires – Part 2-3: Particular requirements – Luminaires for road and street lighting Amendments and corrigenda: EN 60598-2-3:2003/A1:2011, EN 60598-2-3:2003/AC:2005 | reference published (presumption of conformity) |
| EN 60598-2-4:2018 Luminaires – Part 2: Particular requirements – Section 4: Portable general purpose luminaires | reference published (presumption of conformity) |
| EN 60598-2-5:2015 Luminaires – Part 2-5: Particular requirements – Floodlights | reference published (presumption of conformity) |
| EN 60598-2-8:2013 Luminaires – Part 2-8: Particular requirements – Handlamps | reference published (presumption of conformity) |
| EN 60598-2-9:1989 Luminaires – Part 2: Particular requirements – Section 9: Photo and film luminaires (non-professional) Amendments and corrigenda: EN 60598-2-9:1989/A1:1994 | reference published (presumption of conformity) |
| EN 60598-2-10:2003 Luminaires – Part 2-10: Particular requirements – Portable luminaires for children Amendments and corrigenda: EN 60598-2-10:2003/AC:2005 | reference published (presumption of conformity) |
| EN 60598-2-11:2013 Luminaires – Part 2-11: Particular requirements – Aquarium luminaires Amendments and corrigenda: EN 60598-2-11:2013/A1:2022 | reference published (presumption of conformity) |
| EN 60598-2-11:2013 Luminaires – Part 2-11: Particular requirements – Aquarium luminaires | reference withdrawn as of 17.9.2024 |
| EN 60598-2-12:2013 Luminaires – Part 2-12: Particular requirements – Mains socket-outlet mounted nightlights | reference published (presumption of conformity) |
| EN 60598-2-13:2006 Luminaires – Part 2-13: Particular requirements – Ground recessed luminaires Amendments and corrigenda: EN 60598-2-13:2006/A1:2012, EN 60598-2-13:2006/AC:2006, EN 60598-2-13:2006/A11:2021 | reference published (presumption of conformity) |
| EN 60598-2-14:2009 Luminaires – Part 2-14: Particular requirements – Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment | reference published (presumption of conformity) |
| EN 60598-2-19:1989 Luminaires – Part 2: Particular requirements – Section 19: Air-handling luminaires (safety requirements) Amendments and corrigenda: EN 60598-2-19:1989/A2:1998, EN 60598-2-19:1989/AC:2005 | reference published (presumption of conformity) |
| EN 60598-2-20:2015 Luminaires – Part 2-20: Particular requirements – Lighting chains Amendments and corrigenda: EN 60598-2-20:2015/AC:2017-01 | reference published (presumption of conformity) |
| EN 60598-2-21:2015 Luminaires – Part 2-21: Particular requirements – Rope lights Amendments and corrigenda: EN 60598-2-21:2015/AC:2017-01 | reference published (presumption of conformity) |
| EN 60598-2-22:2014 Luminaires – Part 2-22: Particular requirements – Luminaires for emergency lighting Amendments and corrigenda: EN 60598-2-22:2014/AC:2015, EN 60598-2-22:2014/AC:2016-05, EN 60598-2-22:2014/AC:2016-09, EN 60598-2-22:2014/A1:2020 | reference withdrawn as of 11.7.2024 |
| EN 60598-2-24:2013 Luminaires – Part 2-24: Particular requirements – Luminaires with limited surface temperatures | reference published (presumption of conformity) |
| EN 60598-2-25:1994 Luminaires – Part 2-25: Particular requirements – Luminaires for use in clinical areas of hospitals and health care buildings Amendments and corrigenda: EN 60598-2-25:1994/A1:2004 | reference published (presumption of conformity) |
| EN 60618:1997 Inductive voltage dividers Amendments and corrigenda: EN 60618:1997/A2:1997 | reference published (presumption of conformity) |
| EN 60645-1:2015 Electroacoustics – Audiometric equipment – Part 1: Equipment for pure-tone audiometry | reference published (presumption of conformity) |
| EN 60645-3:2007 Electroacoustics – Audiometric equipment – Part 3: Test signals of short duration | reference published (presumption of conformity) |
| EN 60645-6:2010 Electroacoustics – Audiometric equipment – Part 6: Instruments for the measurement of otoacoustic emissions | reference published (presumption of conformity) |
| EN 60645-7:2010 Electroacoustics – Audiometric equipment – Part 7: Instruments for the measurement of auditory brainstem responses | reference published (presumption of conformity) |
| EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems – Part 1: Principles, requirements and tests | reference published (presumption of conformity) |
| EN 60664-3:2003 Insulation coordination for equipment within low-voltage systems – Part 3: Use of coating, potting or moulding for protection against pollution Amendments and corrigenda: EN 60664-3:2003/A1:2010 | reference published (presumption of conformity) |
| EN 60664-4:2006 Insulation coordination for equipment within low-voltage systems – Part 4: Consideration of high-frequency voltage stress Amendments and corrigenda: EN 60664-4:2006/AC:2006 | reference published (presumption of conformity) |
| EN 60669-1:2018 Switches for household and similar fixed electrical installations – Part 1: General requirements Amendments and corrigenda: EN 60669-1:2018/AC:2018-11, EN 60669-1:2018/AC:2020-02 | reference published (presumption of conformity) |
| EN 60669-2-1:2004 Switches for household and similar fixed electrical installations – Part 2-1: Particular requirements – Electronic switches Amendments and corrigenda: EN 60669-2-1:2004/A1:2009, EN 60669-2-1:2004/A12:2010, EN 60669-2-1:2004/AC:2007 | reference published (presumption of conformity) |
| EN 60669-2-2:2006 Switches for household and similar fixed electrical installations – Part 2-2: Particular requirements – Electromagnetic remote-control switches (RCS) | reference published (presumption of conformity) |
| EN 60669-2-3:2006 Switches for household and similar fixed electrical installations – Part 2-3: Particular requirements – Time delay switches (TDS) | reference published (presumption of conformity) |
| EN 60669-2-4:2005 Switches for household and similar fixed electrical installations – Part 2-4: Particular requirements – Isolating switches | reference published (presumption of conformity) |
| EN 60669-2-6:2012 Switches for household and similar fixed electrical installations – Part 2-6: Particular requirements – Fireman’s switches for exterior and interior signs and luminaires | reference published (presumption of conformity) |
| EN 60670-21:2007 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations – Part 21: Particular requirements for boxes and enclosures with provision for suspension means Amendments and corrigenda: EN 60670-21:2007/A11:2023, EN 60670-21:2007/A1:2023 | reference published (presumption of conformity) |
| EN 60670-22:2006 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations – Part 22: Particular requirements for connecting boxes and enclosures | reference published (presumption of conformity) |
| EN 60670-23:2008 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations – Part 23: Particular requirements for floor boxes and enclosures Amendments and corrigenda: EN 60670-23:2008/A11:2023 | reference published (presumption of conformity) |
| EN 60670-24:2013 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations – Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment Amendments and corrigenda: EN 60670-24:2013/A11:2023 | reference published (presumption of conformity) |
| EN 60688:2013 Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals | reference published (presumption of conformity) |
| EN 60691:2016 Thermal-links – Requirements and application guide Amendments and corrigenda: EN 60691:2016/A1:2019 | reference published (presumption of conformity) |
| EN 60695-2-10:2013 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure | reference published (presumption of conformity) |
| EN 60695-2-11:2014 Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) | reference published (presumption of conformity) |
| EN 60695-10-2:2014 Fire hazard testing – Part 10-2: Abnormal heat – Ball pressure test method | reference published (presumption of conformity) |
| EN 60695-10-3:2002 Fire hazard testing – Part 10-3: Abnormal heat – Mould stress relief distortion test | reference published (presumption of conformity) |
| EN 60695-11-2:2014 Fire hazard testing – Part 11-2: Test flames – 1 kW nominal pre-mixed flame: Apparatus, confirmatory test arrangement and guidance | reference published (presumption of conformity) |
| EN 60695-11-3:2012 Fire hazard testing – Part 11-3: Test flames – 500 W flames – Apparatus and confirmational test methods | reference published (presumption of conformity) |
| EN 60695-11-4:2011 Fire hazard testing – Part 11-4: Test flames – 50 W flame – Apparatus and confirmational test method | reference published (presumption of conformity) |
| EN 60695-11-5:2005 Fire hazard testing – Part 11-5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance | reference published (presumption of conformity) |
| EN 60695-11-10:2013 Fire hazard testing – Part 11-10: Test flames – 50 W horizontal and vertical flame test methods Amendments and corrigenda: EN 60695-11-10:2013/AC:2014 | reference published (presumption of conformity) |
| EN 60695-11-20:2015 Fire hazard testing – Part 11-20: Test flames – 500 W flame test method Amendments and corrigenda: EN 60695-11-20:2015/AC:2016 | reference published (presumption of conformity) |
| EN 60702-1:2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V – Part 1: Cables Amendments and corrigenda: EN 60702-1:2002/A1:2015 | reference published (presumption of conformity) |
| EN 60702-2:2002 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V – Part 2: Terminations Amendments and corrigenda: EN 60702-2:2002/A1:2015 | reference published (presumption of conformity) |
| EN 60715:2017 Dimensions of low-voltage switchgear and controlgear – Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories | reference published (presumption of conformity) |
| EN 60719:1993 Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V | reference published (presumption of conformity) |
| EN 60728-11:2017 Cable networks for television signals, sound signals and interactive services – Part 11: Safety Amendments and corrigenda: EN 60728-11:2017/A11:2018 | reference published (presumption of conformity) |
| EN 60730-1:2011 Automatic electrical controls for household and similar use – Part 1: General requirements | reference published (presumption of conformity) |
| EN 60730-2-2:2002 Automatic electrical controls for household and similar use – Part 2-2: Particular requirements for thermal motor protectors Amendments and corrigenda: EN 60730-2-2:2002/A11:2005 | reference published (presumption of conformity) |
| EN 60730-2-3:2007 Automatic electrical controls for household and similar use – Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps | reference published (presumption of conformity) |
| EN 60730-2-4:2007 Automatic electrical controls for household and similar use – Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type | reference published (presumption of conformity) |
| EN 60730-2-5:2015 Automatic electrical controls – Part 2-5: Particular requirements for automatic electrical burner control systems | reference published (presumption of conformity) |
| EN 60730-2-6:2016 Automatic electrical controls – Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements | reference published (presumption of conformity) |
| EN 60730-2-7:2010 Automatic electrical controls for household and similar use – Part 2-7: Particular requirements for timers and time switches Amendments and corrigenda: EN 60730-2-7:2010/AC:2011 | reference published (presumption of conformity) |
| EN 60730-2-8:2002 Automatic electrical controls for household and similar use – Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements Amendments and corrigenda: EN 60730-2-8:2002/A1:2003 | reference published (presumption of conformity) |
| EN 60730-2-9:2010 Automatic electrical controls for household and similar use – Part 2-9: Particular requirements for temperature sensing controls | reference published (presumption of conformity) |
| EN 60730-2-10:2007 Automatic electrical controls for household and similar use – Part 2-10: Particular requirements for motor-starting relays | reference published (presumption of conformity) |
| EN 60730-2-11:2008 Automatic electrical controls for household and similar use – Part 2-11: Particular requirements for energy regulators | reference published (presumption of conformity) |
| EN 60730-2-12:2006 Automatic electrical controls for household and similar use – Part 2-12: Particular requirements for electrically operated door locks Amendments and corrigenda: EN 60730-2-12:2006/A11:2008 | reference published (presumption of conformity) |
| EN 60730-2-13:2008 Automatic electrical controls for household and similar use – Part 2-13: Particular requirements for humidity sensing controls | reference published (presumption of conformity) |
| EN 60730-2-14:1997 Automatic electrical controls for household and similar use – Part 2-14: Particular requirements for electric actuators Amendments and corrigenda: EN 60730-2-14:1997/A11:2005, EN 60730-2-14:1997/A1:2001, EN 60730-2-14:1997/A2:2008 | reference published (presumption of conformity) |
| EN 60730-2-15:2010 Automatic electrical controls for household and similar use – Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls | reference published (presumption of conformity) |
| EN 60730-2-19:2002 Automatic electrical controls for household and similar use – Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements Amendments and corrigenda: EN 60730-2-19:2002/A11:2005, EN 60730-2-19:2002/A2:2008 | reference published (presumption of conformity) |
| EN 60754-1:2014 Test on gases evolved during combustion of materials from cables – Part 1: Determination of the halogen acid gas content | reference withdrawn as of 13.6.2025 |
| EN 60754-2:2014 Test on gases evolved during combustion of materials from cables – Part 2: Determination of acidity (by pH measurement) and conductivity | reference withdrawn as of 13.6.2025 |
| EN 60799:1998 Electrical accessories – Cord sets and interconnection cord sets | reference published (presumption of conformity) |
| EN 60811-100:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 100: General | reference withdrawn as of 13.6.2025 |
| EN 60811-201:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 201: General tests – Measurement of insulation thickness | reference withdrawn as of 13.6.2025 |
| EN 60811-202:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 202: General tests – Measurement of thickness of non-metallic sheath | reference withdrawn as of 13.6.2025 |
| EN 60811-203:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 203: General tests – Measurement of overall dimensions | reference withdrawn as of 13.6.2025 |
| EN 60811-301:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 301: Electrical tests – Measurement of the permittivity at 23 °C of filling compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-302:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 302: Electrical tests – Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-401:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 401: Miscellaneous tests – Thermal ageing methods – Ageing in an air oven | reference withdrawn as of 13.6.2025 |
| EN 60811-402:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 402: Miscellaneous tests – Water absorption tests | reference withdrawn as of 13.6.2025 |
| EN 60811-403:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 403: Miscellaneous tests – Ozone resistance test on cross-linked compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-404:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 404: Miscellaneous tests – Mineral oil immersion tests for sheaths | reference withdrawn as of 13.6.2025 |
| EN 60811-405:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 405: Miscellaneous tests – Thermal stability test for PVC insulations and PVC sheaths | reference withdrawn as of 13.6.2025 |
| EN 60811-406:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 406: Miscellaneous tests – Resistance to stress cracking of polyethylene and polypropylene compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-407:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 407: Miscellaneous tests – Measurement of mass increase of polyethylene and polypropylene compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-408:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 408: Miscellaneous tests – Long-term stability test of polyethylene and polypropylene compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-409:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 409: Miscellaneous tests – Loss of mass test for thermoplastic insulations and sheaths | reference withdrawn as of 13.6.2025 |
| EN 60811-410:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 410: Miscellaneous tests – Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors | reference withdrawn as of 13.6.2025 |
| EN 60811-411:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 411: Miscellaneous tests – Low-temperature brittleness of filling compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-412:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 412: Miscellaneous tests – Thermal ageing methods – Ageing in an air bomb | reference withdrawn as of 13.6.2025 |
| EN 60811-501:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 501: Mechanical tests – Tests for determining the mechanical properties of insulating and sheathing compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-502:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 502: Mechanical tests – Shrinkage test for insulations | reference withdrawn as of 13.6.2025 |
| EN 60811-503:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 503: Mechanical tests – Shrinkage test for sheaths | reference withdrawn as of 13.6.2025 |
| EN 60811-504:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 504: Mechanical tests – Bending tests at low temperature for insulation and sheaths | reference withdrawn as of 13.6.2025 |
| EN 60811-505:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 505: Mechanical tests – Elongation at low temperature for insulations and sheaths | reference withdrawn as of 13.6.2025 |
| EN 60811-506:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 506: Mechanical tests – Impact test at low temperature for insulations and sheaths | reference withdrawn as of 13.6.2025 |
| EN 60811-507:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 507: Mechanical tests – Hot set test for cross-linked materials | reference withdrawn as of 13.6.2025 |
| EN 60811-508:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 508: Mechanical tests – Pressure test at high temperature for insulation and sheaths | reference withdrawn as of 13.6.2025 |
| EN 60811-509:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 509: Mechanical tests – Test for resistance of insulations and sheaths to cracking (heat shock test) | reference withdrawn as of 13.6.2025 |
| EN 60811-510:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 510: Mechanical tests – Methods specific to polyethylene and polypropylene compounds – Wrapping test after thermal ageing in air | reference withdrawn as of 13.6.2025 |
| EN 60811-511:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 511: Mechanical tests – Measurement of the melt flow index of polyethylene compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-512:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 512: Mechanical tests – Methods specific to polyethylene and polypropylene compounds – Tensile strength and elongation at break after conditioning at elevated temperature | reference withdrawn as of 13.6.2025 |
| EN 60811-513:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 513: Mechanical tests – Methods specific to polyethylene and polypropylene compounds – Wrapping test after conditioning | reference withdrawn as of 13.6.2025 |
| EN 60811-601:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 601: Physical tests – Measurement of the drop point of filling compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-602:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 602: Physical tests – Separation of oil in filling compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-603:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 603: Physical tests – Measurement of total acid number of filling compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-604:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 604: Physical tests – Measurement of absence of corrosive components in filling compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-605:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 605: Physical tests – Measurement of carbon black and/or mineral filler in polyethylene compounds | reference withdrawn as of 13.6.2025 |
| EN 60811-606:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 606: Physical tests – Methods for determining the density#IEC 60811-606:2012 | reference withdrawn as of 13.6.2025 |
| EN 60811-607:2012 Electric and optical fibre cables – Test methods for non-metallic materials – Part 607: Physical tests – Test for the assessment of carbon black dispersion in polyethylene and polypropylene | reference withdrawn as of 13.6.2025 |
| EN 60825-1:2014 Safety of laser products – Part 1: Equipment classification and requirements Amendments and corrigenda: EN 60825-1:2014/A11:2021 | reference published (presumption of conformity) |
| EN 60825-2:2004 Safety of laser products – Part 2: Safety of optical fibre communication systems (OFCS) Amendments and corrigenda: EN 60825-2:2004/A1:2007, EN 60825-2:2004/A2:2010 | reference published (presumption of conformity) |
| EN 60825-4:2006 Safety of laser products – Part 4: Laser guards Amendments and corrigenda: EN 60825-4:2006/A1:2008, EN 60825-4:2006/A2:2011 | reference published (presumption of conformity) |
| EN 60825-12:2004 Safety of laser products – Part 12: Safety of free space optical communication systems used for transmission of information | reference published (presumption of conformity) |
| EN 60831-1:2014 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V – Part 1: General – Performance, testing and rating – Safety requirements – Guide for installation and operation Amendments and corrigenda: EN 60831-1:2014/AC:2014 | reference published (presumption of conformity) |
| EN 60831-2:2014 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V – Part 2: Ageing test, self-healing test and destruction test | reference published (presumption of conformity) |
| EN 60838-1:2017 Miscellaneous lampholders – Part 1: General requirements and tests Amendments and corrigenda: EN 60838-1:2017/A1:2017, EN 60838-1:2017/A11:2021, EN 60838-1:2017/A2:2021 | reference published (presumption of conformity) |
| EN 60838-2-1:1996 Miscellaneous lampholders – Part 2: Particular requirements – Section 1: Lampholders S14 Amendments and corrigenda: EN 60838-2-1:1996/A1:1998, EN 60838-2-1:1996/A2:2004 | reference published (presumption of conformity) |
| EN 60838-2-2:2006 Miscellaneous lampholders – Part 2-2: Particular requirements – Connectors for LED-modules Amendments and corrigenda: EN 60838-2-2:2006/A1:2012 | reference published (presumption of conformity) |
| EN 60898-1:2019 Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations – Part 1: Circuit-breakers for a.c. operation | reference published (presumption of conformity) |
| EN 60898-2:2021 Electrical accessories – Circuit-breakers for overcurrent protection for household and similar installations – Part 2: Circuit-breakers for a.c. and d.c. operation | reference published (presumption of conformity) |
| EN 60931-1:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV – Part 1: General – Performance, testing and rating – Safety requirements – Guide for installation and operation Amendments and corrigenda: EN 60931-1:1996/A1:2003 | reference published (presumption of conformity) |
| EN 60931-2:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV – Part 2: Ageing test and destruction test | reference published (presumption of conformity) |
| EN 60931-3:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV – Part 3: Internal fuses | reference published (presumption of conformity) |
| EN 60947-1:2007 Low-voltage switchgear and controlgear – Part 1: General rules Amendments and corrigenda: EN 60947-1:2007/A1:2011, EN 60947-1:2007/A2:2014 | reference published (presumption of conformity) |
| EN 60947-2:2017 Low-voltage switchgear and controlgear – Part 2: Circuit-breakers Amendments and corrigenda: EN 60947-2:2017/A1:2020 | reference published (presumption of conformity) |
| EN 60947-4-2:2012 Low-voltage switchgear and controlgear – Part 4-2: Contactors and motor-starters – AC semiconductor motor controllers and starters | reference published (presumption of conformity) |
| EN 60947-4-3:2014 Low-voltage switchgear and controlgear – Part 4-3: Contactors and motor-starters – AC semiconductor controllers and contactors for non-motor loads | reference published (presumption of conformity) |
| EN 60947-5-1:2017 Low-voltage switchgear and controlgear – Part 5-1: Control circuit devices and switching elements – Electromechanical control circuit devices Amendments and corrigenda: EN 60947-5-1:2017/AC:2020-05 | reference published (presumption of conformity) |
| EN 60947-5-3:1999 Low-voltage switchgear and controlgear – Part 5-3: Control circuit devices and switching elements – Requirements for proximity devices with defined behaviour under fault conditions (PDF) Amendments and corrigenda: EN 60947-5-3:1999/A1:2005 | reference published (presumption of conformity) |
| EN 60947-5-4:2003 Low-voltage switchgear and controlgear – Part 5-4: Control circuit devices and switching elements – Method of assessing the performance of low-energy contacts – Special tests Amendments and corrigenda: EN 60947-5-4:2003/A1:2019 | reference published (presumption of conformity) |
| EN 60947-5-5:1997 Low-voltage switchgear and controlgear – Part 5-5: Control circuit devices and switching elements – Electrical emergency stop device with mechanical latching function Amendments and corrigenda: EN 60947-5-5:1997/A1:2005, EN 60947-5-5:1997/A11:2013, EN 60947-5-5:1997/A2:2017 | reference published (presumption of conformity) |
| EN 60947-5-7:2003 Low-voltage switchgear and controlgear – Part 5-7: Control circuit devices and switching elements – Requirements for proximity devices with analogue output | reference published (presumption of conformity) |
| EN 60947-5-9:2007 Low-voltage switchgear and controlgear – Part 5-9: Control circuit devices and switching elements – Flow rate switches | reference published (presumption of conformity) |
| EN 60947-6-1:2005 Low-voltage switchgear and controlgear – Part 6-1: Multiple function equipment – Transfer switching equipment Amendments and corrigenda: EN 60947-6-1:2005/A1:2014 | reference published (presumption of conformity) |
| EN 60947-6-2:2003 Low-voltage switchgear and controlgear – Part 6-2: Multiple function equipment – Control and protective switching devices (or equipment) (CPS) Amendments and corrigenda: EN 60947-6-2:2003/A1:2007 | reference published (presumption of conformity) |
| EN 60947-7-1:2009 Low-voltage switchgear and controlgear – Part 7-1: Ancillary equipment – Terminal blocks for copper conductors | reference published (presumption of conformity) |
| EN 60947-7-2:2009 Low-voltage switchgear and controlgear – Part 7-2: Ancillary equipment – Protective conductor terminal blocks for copper conductors | reference published (presumption of conformity) |
| EN 60947-7-3:2009 Low-voltage switchgear and controlgear – Part 7-3: Ancillary equipment – Safety requirements for fuse terminal blocks | reference published (presumption of conformity) |
| EN 60950-21:2003 Information technology equipment – Safety – Part 21: Remote power feeding | reference published (presumption of conformity) |
| EN 60950-22:2006 Amendments and corrigenda: EN 60950-22:2006/AC:2008 | reference published (presumption of conformity) |
| EN 60950-23:2006 Amendments and corrigenda: EN 60950-23:2006/AC:2008 | reference published (presumption of conformity) |
| EN 60968:2015 Self-ballasted fluorescent lamps for general lighting services – Safety requirements | reference published (presumption of conformity) |
| EN 60974-6:2016 Arc welding equipment – Part 6: Limited duty equipment | reference published (presumption of conformity) |
| EN 60974-12:2011 Arc welding equipment – Part 12: Coupling devices for welding cables | reference published (presumption of conformity) |
| EN 60998-1:2004 Connecting devices for low-voltage circuits for household and similar purposes – Part 1: General requirements | reference published (presumption of conformity) |
| EN 60998-2-1:2004 Connecting devices for low-voltage circuits for household and similar purposes – Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units | reference published (presumption of conformity) |
| EN 60998-2-2:2004 Connecting devices for low-voltage circuits for household and similar purposes – Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units | reference published (presumption of conformity) |
| EN 60998-2-3:2004 Connecting devices for low-voltage circuits for household and similar purposes – Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units | reference published (presumption of conformity) |
| EN 60998-2-4:2005 Connecting devices for low voltage circuits for household and similar purposes – Part 2-4: Particular requirements for twist-on connecting devices | reference published (presumption of conformity) |
| EN 60999-1:2000 Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units – Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm 2 up to 35 mm 2 (included) | reference published (presumption of conformity) |
| EN 60999-2:2003 Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units – Part 2: Particular requirements for clamping units for conductors above 35 mm 2 up to 300 mm 2 (included) | reference published (presumption of conformity) |
| EN 61008-1:2012 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) – Part 1: General rules Amendments and corrigenda: EN 61008-1:2012/A1:2014, EN 61008-1:2012/A11:2015, EN 61008-1:2012/A2:2014, EN 61008-1:2012/A1:2014/AC:2016-06, EN 61008-1:2012/A12:2017 | reference published (presumption of conformity) |
| EN 61008-2-1:1994 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB’s) – Part 2-1: Applicability of the general rules to RCCB’s functionally independent of line voltage Amendments and corrigenda: EN 61008-2-1:1994/A11:1998, EN 61008-2-1:1994/A11:1998/AC:1999 | reference published (presumption of conformity) |
| EN 61009-1:2012 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) – Part 1: General rules Amendments and corrigenda: EN 61009-1:2012/A1:2014, EN 61009-1:2012/A11:2015, EN 61009-1:2012/A2:2014, EN 61009-1:2012/A13:2021 | reference published (presumption of conformity) |
| EN 61009-2-1:1994 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO’s) – Part 2-1: Applicability of the general rules to RCBO’s functionally independent of line voltage Amendments and corrigenda: EN 61009-2-1:1994/A11:1998, EN 61009-2-1:1994/A11:1998/AC:1999 | reference published (presumption of conformity) |
| EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements Amendments and corrigenda: EN 61010-1:2010/A1:2019/AC:2019-04, EN 61010-1:2010/A1:2019 | reference published (presumption of conformity) |
| EN 61010-2-020:2006 Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-020: Particular requirements for laboratory centrifuges | reference published (presumption of conformity) |
| EN 61010-031:2015 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test | reference published (presumption of conformity) |
| EN 61028:1993 Electrical measuring instruments – X-Y recorders Amendments and corrigenda: EN 61028:1993/A2:1997 | reference published (presumption of conformity) |
| EN 61034-1:2005 Measurement of smoke density of cables burning under defined conditions – Part 1: Test apparatus Amendments and corrigenda: EN 61034-1:2005/A1:2014 | reference withdrawn as of 13.6.2025 |
| EN 61034-2:2005 Measurement of smoke density of cables burning under defined conditions – Part 2: Test procedure and requirements Amendments and corrigenda: EN 61034-2:2005/A1:2013 | reference withdrawn as of 13.6.2025 |
| EN 61048:2006 Auxiliaries for lamps – Capacitors for use in tubular fluorescent and other discharge lamp circuits – General and safety requirements Amendments and corrigenda: EN 61048:2006/A1:2016 | reference published (presumption of conformity) |
| EN 61050:1992 Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kV (generally called neon-transformers) – General and safety requirements Amendments and corrigenda: EN 61050:1992/A1:1995 | reference published (presumption of conformity) |
| EN 61058-2-1:2011 Switches for appliances – Part 2-1: Particular requirements for cord switches | reference published (presumption of conformity) |
| EN 61058-2-4:2005 Switches for appliances – Part 2-4: Particular requirements for independently mounted switches | reference published (presumption of conformity) |
| EN 61058-2-5:2011 Switches for appliances – Part 2-5: Particular requirements for change-over selectors | reference published (presumption of conformity) |
| EN 61071:2007 Capacitors for power electronics | reference published (presumption of conformity) |
| EN 61095:2009 Electromechanical contactors for household and similar purposes | reference published (presumption of conformity) |
| EN 61131-2:2007 Programmable controllers – Part 2: Equipment requirements and tests | reference published (presumption of conformity) |
| EN 61138:2007 Cables for portable earthing and short-circuiting equipment | reference published (presumption of conformity) |
| EN 61140:2002 Protection against electric shock – Common aspects for installation and equipment Amendments and corrigenda: EN 61140:2002/A1:2006 | reference published (presumption of conformity) |
| EN 61143-1:1994 Electrical measuring instruments – X-t recorders – Part 1: Definitions and requirements Amendments and corrigenda: EN 61143-1:1994/A1:1997 | reference published (presumption of conformity) |
| EN 61143-2:1994 Electrical measuring instruments – X-t recorders – Part 2: Recommended additional test methods | reference published (presumption of conformity) |
| EN 61184:2017 Bayonet lampholders | reference published (presumption of conformity) |
| EN 61187:1994 Electrical and electronic measuring equipment – Documentation Amendments and corrigenda: EN 61187:1994/AC:1995 | reference published (presumption of conformity) |
| EN 61195:1999 Double-capped fluorescent lamps – Safety specifications Amendments and corrigenda: EN 61195:1999/A1:2013, EN 61195:1999/A2:2015 | reference published (presumption of conformity) |
| EN 61199:2011 Single-capped fluorescent lamps – Safety specifications Amendments and corrigenda: EN 61199:2011/A1:2013, EN 61199:2011/A2:2015 | reference published (presumption of conformity) |
| EN 61204:1995 Low-voltage power supply devices, d.c. output – Performance characteristics | reference published (presumption of conformity) |
| EN 61210:2010 Connecting devices – Flat quick-connect terminations for electrical copper conductors – Safety requirements | reference published (presumption of conformity) |
| EN 61230:2008 Live working – Portable equipment for earthing or earthing and short-circuiting | reference published (presumption of conformity) |
| EN 61242:1997 Electrical accessories – Cable reels for household and similar purposes Amendments and corrigenda: EN 61242:1997/A1:2008, EN 61242:1997/A2:2016, EN 61242:1997/A1:2008/AC:2010 | reference published (presumption of conformity) |
| EN 61243-3:2014 Live working – Voltage detectors – Part 3: Two-pole low-voltage type Amendments and corrigenda: EN 61243-3:2014/AC:2015, EN 61243-3:2014/AC:2015 | reference published (presumption of conformity) |
| EN 61270-1:1996 Capacitors for microwave ovens – Part 1: General | reference published (presumption of conformity) |
| EN 61310-1:2008 Safety of machinery – Indication, marking and actuation – Part 1: Requirements for visual, acoustic and tactile signals | reference published (presumption of conformity) |
| EN 61310-2:2008 Safety of machinery – Indication, marking and actuation – Part 2: Requirements for marking | reference published (presumption of conformity) |
| EN 61310-3:2008 Safety of machinery – Indication, marking and actuation – Part 3: Requirements for the location and operation of actuators | reference published (presumption of conformity) |
| EN 61316:1999 Industrial cable reels | reference published (presumption of conformity) |
| EN 61347-1:2015 Lamp controlgear – Part 1: General and safety requirements | reference published (presumption of conformity) |
| EN 61347-2-2:2012 Lamp controlgear – Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps | reference published (presumption of conformity) |
| EN 61347-2-3:2011 Lamp control gear – Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps Amendments and corrigenda: EN 61347-2-3:2011/AC:2011 | reference published (presumption of conformity) |
| EN 61347-2-7:2012 Lamp controlgear – Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) Amendments and corrigenda: EN 61347-2-7:2012/A1:2019, EN 61347-2-7:2012/A2:2022 | reference published (presumption of conformity) |
| EN 61347-2-7:2012 Lamp controlgear – Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) Amendments and corrigenda: EN 61347-2-7:2012/A1:2019 | reference withdrawn as of 11.7.2024 |
| EN 61347-2-8:2001 Lamp controlgear – Part 2-8: Particular requirements for ballasts for fluorescent lamps Amendments and corrigenda: EN 61347-2-8:2001/A1:2006, EN 61347-2-8:2001/AC:2003, EN 61347-2-8:2001/AC:2010 | reference published (presumption of conformity) |
| EN 61347-2-9:2013 Lamp controlgear – Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) | reference published (presumption of conformity) |
| EN 61347-2-10:2001 Lamp controlgear – Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) Amendments and corrigenda: EN 61347-2-10:2001/A1:2009, EN 61347-2-10:2001/AC:2010 | reference published (presumption of conformity) |
| EN 61347-2-11:2001 Lamp controlgear – Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires Amendments and corrigenda: EN 61347-2-11:2001/AC:2002, EN 61347-2-11:2001/AC:2010, EN 61347-2-11:2001/A1:2019 | reference published (presumption of conformity) |
| EN 61347-2-12:2005 Lamp controlgear – Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) Amendments and corrigenda: EN 61347-2-12:2005/A1:2010, EN 61347-2-12:2005/AC:2010 | reference published (presumption of conformity) |
| EN 61347-2-13:2014 Lamp controlgear – Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules | reference published (presumption of conformity) |
| EN 61386-1:2008 Conduit systems for cable management – Part 1: General requirements Amendments and corrigenda: EN 61386-1:2008/A1:2019 | reference published (presumption of conformity) |
| EN 61386-21:2004 Conduit systems for cable management – Part 21: Particular requirements – Rigid conduit systems Amendments and corrigenda: EN 61386-21:2004/A11:2010, EN 61386-21:2004/AC:2004 | reference published (presumption of conformity) |
| EN 61386-22:2004 Conduit systems for cable management – Part 22: Particular requirements – Pliable conduit systems Amendments and corrigenda: EN 61386-22:2004/A11:2010, EN 61386-22:2004/AC:2004 | reference published (presumption of conformity) |
| EN 61386-23:2004 Conduit systems for cable management – Part 23: Particular requirements – Flexible conduit systems Amendments and corrigenda: EN 61386-23:2004/A11:2010, EN 61386-23:2004/AC:2004 | reference published (presumption of conformity) |
| EN 61386-25:2011 Conduit systems for cable management – Part 25: Particular requirements – Conduit fixing devices | reference published (presumption of conformity) |
| EN 61439-1:2011 Low-voltage switchgear and controlgear assemblies – Part 1: General rules | reference published (presumption of conformity) |
| EN 61439-2:2011 Low-voltage switchgear and controlgear assemblies – Part 2: Power switchgear and controlgear assemblies | reference published (presumption of conformity) |
| EN 61439-3:2012 Low-voltage switchgear and controlgear assemblies – Part 3: Distribution boards intended to be operated by ordinary persons (DBO) Amendments and corrigenda: EN 61439-3:2012/AC:2019-04 | reference published (presumption of conformity) |
| EN 61439-4:2013 Low-voltage switchgear and controlgear assemblies – Part 4: Particular requirements for assemblies for construction sites (ACS) | reference published (presumption of conformity) |
| EN 61439-5:2015 Low-voltage switchgear and controlgear assemblies – Part 5: Assemblies for power distribution in public networks Amendments and corrigenda: EN 61439-5:2015/AC:2015 | reference published (presumption of conformity) |
| EN 61439-6:2012 Low-voltage switchgear and controlgear assemblies – Part 6: Busbar trunking systems (busways) | reference published (presumption of conformity) |
| EN 61534-1:2011 Powertrack systems – Part 1: General requirements Amendments and corrigenda: EN 61534-1:2011/A1:2014, EN 61534-1:2011/A11:2021, EN 61534-1:2011/A2:2021 | reference published (presumption of conformity) |
| EN 61534-21:2014 Powertrack systems – Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting Amendments and corrigenda: EN 61534-21:2014/A11:2021 | reference published (presumption of conformity) |
| EN 61534-22:2014 Powertrack systems – Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation Amendments and corrigenda: EN 61534-22:2014/A11:2021 | reference published (presumption of conformity) |
| EN 61537:2007 Cable management – Cable tray systems and cable ladder systems | reference published (presumption of conformity) |
| EN 61549:2003 Miscellaneous lamps Amendments and corrigenda: EN 61549:2003/A3:2012, EN 61549:2003/A1:2005, EN 61549:2003/A2:2010 | reference published (presumption of conformity) |
| EN 61557-1:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 1: General requirements | reference published (presumption of conformity) |
| EN 61557-2:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 2: Insulation resistance | reference published (presumption of conformity) |
| EN 61557-3:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 3: Loop impedance | reference published (presumption of conformity) |
| EN 61557-4:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 4: Resistance of earth connection and equipotential bonding | reference published (presumption of conformity) |
| EN 61557-5:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 5: Resistance to earth | reference published (presumption of conformity) |
| EN 61557-6:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems | reference published (presumption of conformity) |
| EN 61557-7:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 7: Phase sequence | reference published (presumption of conformity) |
| EN 61557-8:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 8: Insulation monitoring devices for IT systems | reference published (presumption of conformity) |
| EN 61557-9:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 9: Equipment for insulation fault location in IT systems Amendments and corrigenda: EN 61557-9:2015/AC:2017-02 | reference published (presumption of conformity) |
| EN 61557-10:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures | reference published (presumption of conformity) |
| EN 61557-11:2009 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems | reference published (presumption of conformity) |
| EN 61557-12:2008 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 12: Performance measuring and monitoring devices (PMD) | reference withdrawn as of 11.7.2024 |
| EN 61557-13:2011 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems | reference published (presumption of conformity) |
| EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 14: Equipment for testing the safety of electrical equipment of machinery | reference published (presumption of conformity) |
| EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems | reference published (presumption of conformity) |
| EN 61557-16:2015 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. – Equipment for testing, measuring or monitoring of protective measures – Part 16: Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment | reference published (presumption of conformity) |
| EN 61558-2-1:2007 Safety of power transformers, power supplies, reactors and similar products – Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications | reference published (presumption of conformity) |
| EN 61558-2-2:2007 Safety of power transformers, power supplies, reactors and similar products – Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers | reference published (presumption of conformity) |
| EN 61558-2-3:2010 Safety of transformers, reactors, power supply units and combinations thereof – Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners | reference published (presumption of conformity) |
| EN 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V – Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers | reference published (presumption of conformity) |
| EN 61558-2-5:2010 Safety of transformers, reactors, power supply units and combinations thereof – Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units | reference published (presumption of conformity) |
| EN 61558-2-6:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V – Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers | reference published (presumption of conformity) |
| EN 61558-2-7:2007 Safety of power transformers, power supplies, reactors and similar products – Part 2-7: Particular requirements and tests for transformers and power supplies for toys | reference published (presumption of conformity) |
| EN 61558-2-8:2010 Safety of transformers, reactors, power supply units and combinations thereof – Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes | reference published (presumption of conformity) |
| EN 61558-2-9:2011 Safety of transformers, reactors, power supply units and combinations thereof – Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps | reference published (presumption of conformity) |
| EN 61558-2-12:2011 Safety of transformers, reactors, power supply units and combinations thereof – Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage | reference published (presumption of conformity) |
| EN 61558-2-13:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V – Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers | reference published (presumption of conformity) |
| EN 61558-2-14:2013 Safety of transformers, reactors, power supply units and combination thereof – Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers | reference published (presumption of conformity) |
| EN 61558-2-15:2012 Safety of transformers, reactors, power supply units and combinations thereof – Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations | reference published (presumption of conformity) |
| EN 61558-2-16:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V – Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units Amendments and corrigenda: EN 61558-2-16:2009/A1:2013 | reference published (presumption of conformity) |
| EN 61558-2-20:2011 Safety of transformers, reactors, power supply units and combinations thereof – Part 2-20: Particular requirements and tests for small reactors | reference published (presumption of conformity) |
| EN 61558-2-23:2010 Safety of transformers, reactors, power supply units and combinations thereof – Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites | reference published (presumption of conformity) |
| EN 61558-2-26:2013 Safety of transformers, reactors, power supply units and combinations thereof – Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes | reference published (presumption of conformity) |
| EN 61643-11:2012 Low-voltage surge protective devices – Part 11: Surge protective devices connected to low-voltage power systems – Requirements and test methods Amendments and corrigenda: EN 61643-11:2012/A11:2018 | reference published (presumption of conformity) |
| EN 61643-21:2001 Low voltage surge protective devices – Part 21: Surge protective devices connected to telecommunications and signalling networks – Performance requirements and testing methods Amendments and corrigenda: EN 61643-21:2001/A1:2009, EN 61643-21:2001/A2:2013 | reference published (presumption of conformity) |
| EN 61643-31:2019 Low-voltage surge protective devices – Part 31: Requirements and test methods for SPDs for photovoltaic installations | reference published (presumption of conformity) |
| EN 61770:2009 Electric appliances connected to the water mains – Avoidance of backsiphonage and failure of hose-sets Amendments and corrigenda: EN 61770:2009/AC:2011 | reference published (presumption of conformity) |
| EN 61800-5-1:2007 Adjustable speed electrical power drive systems – Part 5-1: Safety requirements – Electrical, thermal and energy Amendments and corrigenda: EN 61800-5-1:2007/A1:2017, EN 61800-5-1:2007/A11:2021 | reference published (presumption of conformity) |
| EN 61812-1:2011 Time relays for industrial and residential use – Part 1: Requirements and tests | reference published (presumption of conformity) |
| EN 61851-21:2002 Electric vehicle conductive charging system – Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply | reference published (presumption of conformity) |
| EN 61851-23:2014 Electric vehicle conductive charging system – Part 23: DC electric vehicle charging station Amendments and corrigenda: EN 61851-23:2014/AC:2016-06 | reference published (presumption of conformity) |
| EN 61851-24:2014 Electric vehicle conductive charging system – Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging Amendments and corrigenda: EN 61851-24:2014/AC:2015 | reference published (presumption of conformity) |
| EN 61869-1:2009 Instrument transformers – Part 1: General requirements | reference published (presumption of conformity) |
| EN 61869-2:2012 Instrument transformers – Part 2: Additional requirements for current transformers | reference published (presumption of conformity) |
| EN 61869-3:2011 Instrument transformers – Part 3: Additional requirements for inductive voltage transformers | reference published (presumption of conformity) |
| EN 61869-4:2014 Instrument transformers – Part 4: Additional requirements for combined transformers Amendments and corrigenda: EN 61869-4:2014/AC:2014 | reference published (presumption of conformity) |
| EN 61869-5:2011 Instrument transformers – Part 5: Additional requirements for capacitor voltage transformers Amendments and corrigenda: EN 61869-5:2011/AC:2015 | reference published (presumption of conformity) |
| EN 61921:2003 Power capacitors – Low-voltage power factor correction banks | reference published (presumption of conformity) |
| EN 61995-1:2008 Devices for the connection of luminaires for household and similar purposes – Part 1: General requirements Amendments and corrigenda: EN 61995-1:2008/A1:2017, EN 61995-1:2008/A11:2021 | reference published (presumption of conformity) |
| EN 61995-2:2009 Devices for the connection of luminaires for household and similar purposes – Part 2: Standard sheets for DCL | reference published (presumption of conformity) |
| EN 62020:1998 Electrical accessories – Residual current monitors for household and similar uses (RCMs) Amendments and corrigenda: EN 62020:1998/A1:2005 | reference published (presumption of conformity) |
| EN 62026-1:2007 Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 1: General rules | reference published (presumption of conformity) |
| EN 62026-2:2013 Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 2: Actuator sensor interface (AS-i) | reference published (presumption of conformity) |
| EN 62026-3:2015 Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 3: DeviceNet Amendments and corrigenda: EN 62026-3:2015/AC:2019-12 | reference published (presumption of conformity) |
| EN 62026-7:2013 Low-voltage switchgear and controlgear – Controller-device interfaces (CDIs) – Part 7: CompoNet | reference published (presumption of conformity) |
| EN 62035:2014 Discharge lamps (excluding fluorescent lamps) – Safety specifications Amendments and corrigenda: EN 62035:2014/A1:2019 | reference published (presumption of conformity) |
| EN 62080:2009 Sound signalling devices for household and similar purposes | reference published (presumption of conformity) |
| EN 62094-1:2003 Indicator light units for household and similar fixed-electrical installations – Part 1: General requirements Amendments and corrigenda: EN 62094-1:2003/A11:2003 | reference published (presumption of conformity) |
| EN 62109-1:2010 Safety of power converters for use in photovoltaic power systems – Part 1: General requirements | reference published (presumption of conformity) |
| EN 62109-2:2011 Safety of power converters for use in photovoltaic power systems – Part 2: Particular requirements for inverters | reference published (presumption of conformity) |
| EN 62135-1:2015 Resistance welding equipment – Part 1: Safety requirements for design, manufacture and installation Amendments and corrigenda: EN 62135-1:2015/AC:2016-02 | reference published (presumption of conformity) |
| EN 62196-1:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 1: General requirements | reference published (presumption of conformity) |
| EN 62196-2:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories Amendments and corrigenda: EN 62196-2:2012/A12:2014/AC:2014, EN 62196-2:2012/A12:2014, EN 62196-2:2012/A11:2013 | reference published (presumption of conformity) |
| EN 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of electric vehicles – Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers | reference published (presumption of conformity) |
| EN 62208:2011 Empty enclosures for low-voltage switchgear and controlgear assemblies – General requirements | reference published (presumption of conformity) |
| EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure Amendments and corrigenda: EN 62233:2008/AC:2008 | reference published (presumption of conformity) |
| EN 62253:2011 Photovoltaic pumping systems – Design qualification and performance measurements | reference published (presumption of conformity) |
| EN 62282-3-100:2012 Fuel cell technologies – Part 3-100: Stationary fuel cell power systems – Safety | reference published (presumption of conformity) |
| EN 62282-3-300:2012 Fuel cell technologies – Part 3-300: Stationary fuel cell power systems – Installation | reference published (presumption of conformity) |
| EN 62282-5-1:2012 Fuel cell technologies – Part 5-1: Portable fuel cell power systems – Safety | reference published (presumption of conformity) |
| EN 62310-1:2005 Static transfer systems (STS) – Part 1: General and safety requirements | reference published (presumption of conformity) |
| EN 62311:2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz – 300 GHz) | reference published (presumption of conformity) |
| EN 62368-1:2014 Audio/video, information and communication technology equipment – Part 1: Safety requirements (IEC 62368-1:2014, modified) Amendments and corrigenda: EN 62368-1:2014/AC:2015 | reference published (presumption of conformity) |
| EN 62395-1:2013 Electrical resistance trace heating systems for industrial and commercial applications – Part 1: General and testing requirements | reference published (presumption of conformity) |
| EN 62423:2012 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses Amendments and corrigenda: EN 62423:2012/A11:2021, EN 62423:2012/A12:2022 | reference published (presumption of conformity) |
| EN 62423:2012 Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses Amendments and corrigenda: EN 62423:2012/A11:2021 | reference withdrawn as of 17.9.2024 |
| EN 62444:2013 Cable glands for electrical installations | reference published (presumption of conformity) |
| EN 62471:2008 Photobiological safety of lamps and lamp systems | reference published (presumption of conformity) |
| EN 62477-1:2012 Safety requirements for power electronic converter systems and equipment – Part 1: General Amendments and corrigenda: EN 62477-1:2012/A11:2014, EN 62477-1:2012/A1:2017, EN 62477-1:2012/A12:2021 | reference published (presumption of conformity) |
| EN 62479:2010 Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) | reference published (presumption of conformity) |
| EN 62493:2010 Assessment of lighting equipment related to human exposure to electromagnetic fields | reference published (presumption of conformity) |
| EN 62532:2011 Fluorescent induction lamps – Safety specifications | reference published (presumption of conformity) |
| EN 62549:2011 Articulated systems and flexible systems for cable guiding | reference published (presumption of conformity) |
| EN 62560:2012 Self-ballasted LED-lamps for general lighting services by voltage 50 V – Safety specifications Amendments and corrigenda: EN 62560:2012/A1:2015, EN 62560:2012/A1:2015/AC:2015, EN 62560:2012/AC:2015, EN 62560:2012/A11:2019 | reference published (presumption of conformity) |
| EN 62606:2013 General requirements for arc fault detection devices Amendments and corrigenda: EN 62606:2013/A1:2017 | reference published (presumption of conformity) |
| EN 62626-1:2014 Low-voltage switchgear and controlgear enclosed equipment – Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work | reference published (presumption of conformity) |
| EN 62776:2015 Double-capped LED lamps designed to retrofit linear fluorescent lamps – Safety specifications | reference published (presumption of conformity) |
| EN 62868:2015 Organic light emitting diode (OLED) panels for general lighting – Safety requirements | reference published (presumption of conformity) |
| EN 62949:2017 Particular safety requirements for equipment to be connected to information and communication networks | reference published (presumption of conformity) |
| EN 63024:2018 Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses | reference published (presumption of conformity) |
| EN IEC 60238:2018 Edison screw lampholders Amendments and corrigenda: EN IEC 60238:2018/A1:2018, EN IEC 60238:2018/A2:2021 | reference published (presumption of conformity) |
| EN IEC 60320-1:2021 Appliance couplers for household and similar general purposes – Part 1: General requirements | reference published (presumption of conformity) |
| EN IEC 60320-2-4:2021 Appliance couplers for household and similar general purposes – Part 2-4: Couplers dependent on appliance weight for engagement | reference published (presumption of conformity) |
| EN IEC 60335-2-11:2022 Household and similar electrical appliances – Safety – Part 2-11: Particular requirements for tumble dryers Amendments and corrigenda: EN IEC 60335-2-11:2022/A11:2022 | reference published (presumption of conformity) |
| EN IEC 60335-2-24:2022 Household and similar electrical appliances – Safety – Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers Amendments and corrigenda: EN IEC 60335-2-24:2022/A11:2022 | reference published (presumption of conformity) |
| EN IEC 60335-2-25:2021 Household and similar electrical appliances – Safety – Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens Amendments and corrigenda: EN IEC 60335-2-25:2021/A11:2021 | reference published (presumption of conformity) |
| EN IEC 60335-2-41:2021 Household and similar electrical appliances – Safety – Particular requirements for pumps Amendments and corrigenda: EN IEC 60335-2-41:2021/A11:2021 | reference published (presumption of conformity) |
| EN IEC 60335-2-43:2020 Household and similar electrical appliances – Safety – Part 2-43: Particular requirements for clothes dryers and towel rails Amendments and corrigenda: EN IEC 60335-2-43:2020/A11:2020 | reference published (presumption of conformity) |
| EN IEC 60335-2-51:2023 Household and similar electrical appliances – Safety – Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations Amendments and corrigenda: EN IEC 60335-2-51:2023/A11:2023 | reference published (presumption of conformity) |
| EN IEC 60335-2-84:2021 Household and similar electrical appliances – Safety – Part 2-84: Particular requirements for toilet appliances Amendments and corrigenda: EN IEC 60335-2-84:2021/A11:2021, EN IEC 60335-2-84:2021/A12:2023 | reference published (presumption of conformity) |
| EN IEC 60335-2-96:2021 Household and similar electrical appliances – Safety – Part 2-96: Particular requirements for flexible sheet heating elements for room heating Amendments and corrigenda: EN IEC 60335-2-96:2021/A11:2021 | reference published (presumption of conformity) |
| EN IEC 60335-2-105:2021 Household and similar electrical appliances – Safety – Part 2-105: Particular requirements for multifunctional shower cabinets Amendments and corrigenda: EN IEC 60335-2-105:2021/A11:2021 | reference published (presumption of conformity) |
| EN IEC 60598-1:2021 Luminaires – Part 1: General requirements and tests Amendments and corrigenda: EN IEC 60598-1:2021/A11:2022 | reference published (presumption of conformity) |
| EN IEC 60598-2-17:2018 Luminaires – Part 2-17: Particular requirements – Luminaires for stage lighting, television and film studios (outdoor and indoor) | reference published (presumption of conformity) |
| EN IEC 60598-2-22:2022 Luminaires – Part 2-22: Particular requirements – Luminaires for emergency lighting | reference published (presumption of conformity) |
| EN IEC 60598-2-23:2021 Luminaires – Part 2-23: Particular requirements – Extra-low-voltage lighting systems for ELV light sources | reference published (presumption of conformity) |
| EN IEC 60670-1:2021 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations – Part 1: General requirements Amendments and corrigenda: EN IEC 60670-1:2021/A11:2021 | reference published (presumption of conformity) |
| EN IEC 60934:2019 Circuit breakers for equipment (CBE) | reference published (presumption of conformity) |
| EN IEC 60947-3:2021 Low-voltage switchgear and controlgear – Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | reference published (presumption of conformity) |
| EN IEC 60947-4-1:2019 Low-voltage switchgear and controlgear – Part 4-1: Contactors and motor-starters – Electromechanical contactors and motor-starters Amendments and corrigenda: EN IEC 60947-4-1:2019/AC:2020-05 | reference published (presumption of conformity) |
| EN IEC 60947-5-8:2021 Low-voltage switchgear and controlgear – Part 5-8: Control circuit devices and switching elements – Three-position enabling switches | reference published (presumption of conformity) |
| EN IEC 60947-8:2023 Low-voltage switchgear and controlgear – Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines | reference published (presumption of conformity) |
| EN IEC 60947-9-1:2019 Low-voltage switchgear and controlgear – Part 9-1: Active arc-fault mitigation systems – Arc quenching devices | reference published (presumption of conformity) |
| EN IEC 60974-1:2018 Arc welding equipment – Part 1: Welding power sources Amendments and corrigenda: EN IEC 60974-1:2018/A1:2019 | reference published (presumption of conformity) |
| EN IEC 60974-2:2019 Arc welding equipment – Part 2: Liquid cooling systems | reference published (presumption of conformity) |
| EN IEC 60974-3:2019 Arc welding equipment – Part 3: Arc striking and stabilizing devices | reference published (presumption of conformity) |
| EN IEC 60974-5:2019 Arc welding equipment – Part 5: Wire feeders | reference published (presumption of conformity) |
| EN IEC 60974-7:2019 Arc welding equipment – Part 7: Torches | reference published (presumption of conformity) |
| EN IEC 60974-8:2021 Arc welding equipment – Part 8: Gas consoles for welding and plasma cutting systems | reference published (presumption of conformity) |
| EN IEC 60974-11:2021 Arc welding equipment – Part 11: Electrode holders | reference published (presumption of conformity) |
| EN IEC 60974-13:2021 Arc welding equipment – Part 13: Welding current return clamp | reference published (presumption of conformity) |
| EN IEC 61010-2-010:2020 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-010: Particular requirements for laboratory equipment for the heating of materials | reference published (presumption of conformity) |
| EN IEC 61010-2-011:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-011: Particular requirements for refrigerating equipment Amendments and corrigenda: EN IEC 61010-2-011:2021/A11:2021 | reference published (presumption of conformity) |
| EN IEC 61010-2-012:2022 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment Amendments and corrigenda: EN IEC 61010-2-012:2022/A11:2022 | reference published (presumption of conformity) |
| EN IEC 61010-2-030:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-030: Particular requirements for equipment having testing or measuring circuits Amendments and corrigenda: EN IEC 61010-2-030:2021/A11:2021 | reference published (presumption of conformity) |
| EN IEC 61010-2-032:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement Amendments and corrigenda: EN IEC 61010-2-032:2021/A11:2021 | reference published (presumption of conformity) |
| EN IEC 61010-2-033:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-033: Particular requirements for hand-held multimeters for domestic and professional use, capable of measuring mains voltage Amendments and corrigenda: EN IEC 61010-2-033:2021/A11:2021 | reference published (presumption of conformity) |
| EN IEC 61010-2-034:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength Amendments and corrigenda: EN IEC 61010-2-034:2021/A11:2021 | reference published (presumption of conformity) |
| EN IEC 61010-2-040:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials | reference published (presumption of conformity) |
| EN IEC 61010-2-051:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-051: Particular requirements for laboratory equipment for mixing and stirring Amendments and corrigenda: EN IEC 61010-2-051:2021/A11:2021 | reference published (presumption of conformity) |
| EN IEC 61010-2-061:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization Amendments and corrigenda: EN IEC 61010-2-061:2021/A11:2021 | reference published (presumption of conformity) |
| EN IEC 61010-2-081:2020 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes | reference published (presumption of conformity) |
| EN IEC 61010-2-091:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-091: Particular requirements for cabinet X-ray systems Amendments and corrigenda: EN IEC 61010-2-091:2021/A11:2021 | reference published (presumption of conformity) |
| EN IEC 61010-2-130:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-130: Particular requirements for equipment intended to be used in educational establishments by children | reference published (presumption of conformity) |
| EN IEC 61010-2-201:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-201: Particular requirements for control equipment | reference published (presumption of conformity) |
| EN IEC 61010-2-202:2021 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-202: Particular requirements for electrically operated valve actuators | reference published (presumption of conformity) |
| EN IEC 61058-1:2018 Switches for appliances – Part 1: General requirements | reference published (presumption of conformity) |
| EN IEC 61204-7:2018 Low-voltage switch mode power supplies – Part 7: Safety requirements | reference published (presumption of conformity) |
| EN IEC 61293:2020 Marking of electrical equipment with ratings related to electrical supply – Safety requirements | reference published (presumption of conformity) |
| EN IEC 61347-2-14:2018 Lamp controlgear – Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps Amendments and corrigenda: EN IEC 61347-2-14:2018/A11:2021 | reference published (presumption of conformity) |
| EN IEC 61535:2019 Installation couplers intended for permanent connection in fixed installations | reference published (presumption of conformity) |
| EN IEC 61557-12:2022 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC – Equipment for testing, measuring or monitoring of protective measures – Part 12: Power metering and monitoring devices (PMD) | reference published (presumption of conformity) |
| EN IEC 61558-1:2019 Safety of transformers, reactors, power supply units and combinations thereof – Part 1: General requirements and tests | reference published (presumption of conformity) |
| EN IEC 61730-1:2018 Photovoltaic (PV) module safety qualification – Part 1: Requirements for construction Amendments and corrigenda: EN IEC 61730-1:2018/AC:2018-06 | reference published (presumption of conformity) |
| EN IEC 61730-2:2018 Photovoltaic (PV) module safety qualification – Part 2: Requirements for testing Amendments and corrigenda: EN IEC 61730-2:2018/AC:2018-06 | reference published (presumption of conformity) |
| EN IEC 61851-1:2019 Electric vehicle conductive charging system – Part 1: General requirements Amendments and corrigenda: EN IEC 61851-1:2019/AC:2023-12 | reference published (presumption of conformity) |
| EN IEC 61914:2021 Cable cleats for electrical installations | reference published (presumption of conformity) |
| EN IEC 62031:2020 LED modules for general lighting – Safety specifications Amendments and corrigenda: EN IEC 62031:2020/A11:2021 | reference published (presumption of conformity) |
| EN IEC 62040-1:2019 Uninterruptible power systems (UPS) – Part 1: Safety requirements Amendments and corrigenda: EN IEC 62040-1:2019/A11:2021 | reference published (presumption of conformity) |
| EN IEC 62275:2019 Cable management systems – Cable ties for electrical installations | reference published (presumption of conformity) |
| EN IEC 63044-3:2018 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) – Part 3: Electrical safety requirements | reference published (presumption of conformity) |
| EN ISO 11252:2013 Lasers and laser-related equipment – Laser device – Minimum requirements for documentation (ISO 11252:2013) | reference published (presumption of conformity) |
| HD 308 S2:2001 Identification of cores in cables and flexible cords | reference published (presumption of conformity) |
| HD 361 S3:1999 System for cable designation Amendments and corrigenda: HD 361 S3:1999/A1:2006,, HD 361 S3:1999/AC:1999 | reference withdrawn as of 13.6.2025 |
| HD 368 S1:1978 Direct acting recording electrical measuring instruments and their accessories | reference published (presumption of conformity) |
| HD 549 S1:1989 Conference systems – Electrical and audio requirements | reference published (presumption of conformity) |
| HD 597 S1:1992 Coupling capacitors and capacitor dividers Amendments and corrigenda: HD 597 S1:1992/AC:1992 | reference published (presumption of conformity) |
| HD 603 S1:1994 Distribution cables of rated voltage 0,6/1 kV Amendments and corrigenda: HD 603 S1:1994/A3:2007, HD 603 S1:1994/A1:1997, HD 603 S1:1994/A2:2003 | reference published (presumption of conformity) |
| HD 604 S1:1994 0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations Amendments and corrigenda: HD 604 S1:1994/A3:2005, HD 604 S1:1994/A1:1997, HD 604 S1:1994/A2:2002 | reference published (presumption of conformity) |
| HD 605 S2:2008 Electric cables – Additional test methods Amendments and corrigenda: HD 605 S2:2008/AC:2010 | reference withdrawn as of 13.6.2025 |
| HD 626 S1:1996 Overhead distribution cables of rated voltage Uo/U(Um): 0,6/1 (1,2) kV Amendments and corrigenda: HD 626 S1:1996/A1:1997, HD 626 S1:1996/A2:2002 | reference published (presumption of conformity) |
| HD 627 S1:1996 Multicore and multipair cables for installation above and below ground Amendments and corrigenda: HD 627 S1:1996/A1:2000, HD 627 S1:1996/A2:2005 | reference published (presumption of conformity) |
| HD 639 S1:2002 Electrical accessories – Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) Amendments and corrigenda: HD 639 S1:2002/A1:2003, HD 639 S1:2002/A2:2010, HD 639 S1:2002/AC:2003 | reference published (presumption of conformity) |
| HD 60269-2:2013 Low-voltage fuses – Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) – Examples of standardized systems of fuses A to K | reference published (presumption of conformity) |
| HD 60269-3:2010 Low-voltage fuses – Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) – Examples of standardized systems of fuses A to F Amendments and corrigenda: HD 60269-3:2010/A1:2013 | reference published (presumption of conformity) |
| HD 62640:2015 Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses | reference published (presumption of conformity) |