Harmonised standards – Machinery Directive (until 19 Jan 2027) (MD)
| Edition | Status | Type |
|---|---|---|
| EN 81-40:2020 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility | reference published (presumption of conformity) | C |
| EN 81-40:2008 Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons with impaired mobility | reference withdrawn as of 15 April 2023 | C |
| EN 201:2009 Plastics and rubber machines - Injection moulding machines - Safety requirements | reference withdrawn as of 15 April 2023 | C |
| EN 303-5:2021 Heating boilers – Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW – Terminology, requirements, testing and marking | reference published (presumption of conformity) | C |
| EN 303-5:2012 Heating boilers – Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW – Terminology, requirements, testing and marking | reference withdrawn as of 11 October 2023 | C |
| EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body | reference withdrawn as of 3 September 2022 | B |
| EN 474-1:2006+A6:2019 Earth-moving machinery – Safety – Part 1: General requirements | reference published (presumption of conformity) | C |
| EN 474-1:2006+A5:2018 Earth-moving machinery – Safety – Part 1: General requirements | reference valid 15 October 2021 – 11 October 2022. | C |
| EN 474-1:2006+A4:2013 Earth-moving machinery — Safety — Part 1: General requirements | reference withdrawn as of 19 September 2020 | C |
| EN 574:1996+A1:2008 Safety of machinery - Two-hand control devices - Functional aspects - Principles for design | reference withdrawn as of 3 September 2022 | B |
| EN 692:2005+A1:2009 Machine tools — Mechanical presses — Safety | reference withdrawn as of 19 September 2021 | C |
| EN 693:2001+A2:2011 Machine tools — Safety — Hydraulic presse | reference withdrawn as of 19 March 2021 | C |
| EN 707:2018 Agricultural machinery – Slurry tankers – Safety | reference published (presumption of conformity) | C |
| EN 707:1999+A1:2009 Agricultural machinery – Slurry tankers – Safety | reference withdrawn as of 2 October 2021 | C |
| EN 786:1996+A2:2009 Garden equipment — Electrically powered walk- behind and hand-held lawn trimmers and lawn edge trimmers — Mechanical safety | reference withdrawn as of 19 September 2020 | C |
| EN 792-13:2000+A1:2008 Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools | reference withdrawn as of 2 October 2021 | C |
| EN 848-1:2007+A2:2012 Safety of woodworking machines — One side moulding machines with rotating tool — Part 1: Single spindle vertical moulding machines | reference withdrawn as of 19 September 2020 | C |
| EN 848-3:2012 Safety of woodworking machines – One side moulding machines with rotating tool – Part 3: Numerically controlled (NC) boring and routing machines | reference withdrawn as of 2 October 2021 | C |
| EN 859:2007+A2:2012 Safety of woodworking machines – Hand fed surface planing machines | reference withdrawn as of 2 October 2021 | C |
| EN 860:2007+A2:2012 Safety of woodworking machines – One side thickness planing machines | reference withdrawn as of 2 October 2021 | C |
| EN 861:2007+A2:2012 Safety of woodworking machines – Surface planing and thicknessing machines | reference withdrawn as of 2 October 2021 | C |
| EN 940:2009+A1:2012 Safety of woodworking machines - Combined woodworking machines | reference withdrawn as of 3 September 2022 | C |
| EN 1037:1995+A1:2008 Safety of machinery — Prevention of unexpected start-up | reference withdrawn as of 19 September 2020 | B |
| EN 1114-3:2019 Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs | reference published (presumption of conformity) | C |
| EN 1114-3:2001+A1:2008 Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs | reference withdrawn as of 2 October 2021 | C |
| EN 1127-1:2019 Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology | reference published (presumption of conformity) | B |
| EN 1127-1:2011 Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology | reference withdrawn as of 2 October 2021 | B |
| EN 1175:2020 Safety of industrial trucks - Electrical/electronic requirements | reference published (presumption of conformity) | C |
| EN 1175-1:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks | reference withdrawn as of 15 April 2023 | C |
| EN 1175-2:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks | reference withdrawn as of 15 April 2023 | C |
| EN 1175-3:1998+A1:2010 Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks | reference withdrawn as of 15 April 2023 | C |
| EN 1459-2:2015+A1:2018 Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks | reference published (presumption of conformity) | C |
| EN 1459-2:2015 Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks | reference withdrawn as of 2 October 2021 | C |
| EN 1459-5:2020 Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface | reference published (presumption of conformity) | C |
| EN 1501-1:2021 Refuse collection vehicles – General requirements and safety requirements – Part 1: Rear loaded refuse collection vehicles | reference published (presumption of conformity) | C |
| EN 1501-1:2011+A1:2015 Refuse collection vehicles – General requirements and safety requirements – Part 1: Rear loaded refuse collection vehicles | reference withdrawn as of 11 October 2023 | C |
| EN 1501-2:2021 Refuse collection vehicles – General requirements and safety requirements – Part 2: Side loaded refuse collection vehicles | reference published (presumption of conformity) | C |
| EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices – General requirements and safety requirements – Part 2: Side loaded refuse collection vehicles | reference withdrawn as of 11 October 2023 | C |
| EN 1501-3:2021 Refuse collection vehicles – General requirements and safety requirements – Part 3: Front loaded refuse collection vehicles | reference published (presumption of conformity) | C |
| EN 1501-3:2008 Refuse collection vehicles and their associated lifting devices – General requirements and safety requirements – Part 3: Front loaded refuse collection vehicles | reference withdrawn as of 11 October 2023 | C |
| EN 1501-5:2021 Refuse collection vehicles – General requirements and safety requirements – Part 5: Lifting devices for refuse collection vehicles | reference published (presumption of conformity) | C |
| EN 1501-5:2011 Refuse collection vehicles – General requirements and safety requirements – Part 5: Lifting devices for refuse collection vehicles | reference withdrawn as of 11 October 2023 | C |
| EN 1612:2019 Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements | reference published (presumption of conformity) | C |
| EN 1612-1:1997+A1:2008 Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements for metering and mixing units | reference withdrawn as of 3 September 2022 | C |
| EN 1710:2005+A1:2008 Equipment and components intended for use in potentially explosive atmospheres in underground mines | reference withdrawn as of 19 September 2020 | C |
| EN 1756-1:2021 Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 1: Tail lifts for goods | reference published (presumption of conformity) | C |
| EN 1756-1:2001+A1:2008 Tail lifts – Platform lifts for mounting on wheeled vehicles – Safety requirements – Part 1: Tail lifts for goods | reference withdrawn as of 11 October 2023 | C |
| EN 1804-1:2020 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements | reference published (presumption of conformity) | C |
| EN 1804-1:2001+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements | reference withdrawn as of 15 April 2023 | C |
| EN 1804-2:2020 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams | reference published (presumption of conformity) | C |
| EN 1804-2:2001+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams | reference withdrawn as of 15 April 2023 | C |
| EN 1804-3:2020 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic and electro hydraulic control systems | reference published (presumption of conformity) | C |
| EN 1804-3:2006+A1:2010 Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 3: Hydraulic control systems | reference withdrawn as of 15 April 2023 | C |
| EN 1829-1:2021 High-pressure water jet machines – Safety requirements – Part 1: Machines | reference published (presumption of conformity) | C |
| EN 1829-1:2010 High pressure water jet machines – Safety requirements – Part 1: Machines | reference withdrawn as of 11 October 2023 | C |
| EN 1837:2020 Safety of machinery - Integral lighting of machines | reference published (presumption of conformity) | B |
| EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines | reference withdrawn as of 15 April 2023 | B |
| EN 1853:2017 Agricultural machinery — Trailers – Safety | reference published (presumption of conformity) | C |
| EN 1853:1999+A1:2009 Agricultural machinery — Trailers with tipping body – Safety | reference withdrawn as of 19 September 2020 | C |
| EN 1870-4:2012 Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading | reference withdrawn as of 3 September 2022 | C |
| EN 1870-6:2017 Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for fire wood | reference published (presumption of conformity) | C |
| EN 1870-6:2002+A1:2009 Safety of woodworking machines — Circular sawing machines — Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading | reference withdrawn as of 19 September 2020 | C |
| EN 1870-13:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 13: Horizontal beam panel sawing machines | reference withdrawn as of 19 September 2020 | C |
| EN 1870-14:2007+A2:2012 Safety of woodworking machines — Circular sawing machines — Part 14: Vertical panel sawing machines | reference withdrawn as of 19 September 2020 | C |
| EN 1870-19:2013 Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws | reference withdrawn as of 3 September 2022 | C |
| EN 1889-1:2011 Machines for underground mines – Mobile machines working underground – Safety – Part 1: Rubber tyred vehicles | reference withdrawn as of 2 October 2021 | C |
| EN 1974:2020 Food processing machinery - Slicing machines - Safety and hygiene requirements | reference published (presumption of conformity) | C |
| EN 1974:1998+A1:2009 Food processing machinery - Slicing machines - Safety and hygiene requirements | reference withdrawn as of 15 April 2023 | C |
| EN 12012-1:2018 Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators and shredders | reference published (presumption of conformity) | C |
| EN 12012-1:2007+A1:2008 Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators | reference withdrawn as of 2 October 2021 | C |
| EN 12012-3:2001+A1:2008 Plastics and rubber machines – Size reduction machines – Part 3: Safety requirements for shredders | reference withdrawn as of 2 October 2021 | C |
| EN 12013:2018 Plastics and rubber machines — Internal mixers — Safety requirements | reference published (presumption of conformity) | C |
| EN 12013:2000+A1:2008 Plastics and rubber machines — Internal mixers — Safety requirements | reference withdrawn as of 19 September 2020 | C |
| EN 12301:2019 Plastics and rubber machines - Calenders - Safety requirements | reference published (presumption of conformity) | C |
| EN 12301:2000+A1:2008 Plastics and rubber machines - Calenders - Safety requirements | reference withdrawn as of 3 September 2022 | C |
| EN 12312-3:2017+A1:2020 Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles | reference published (presumption of conformity) | C |
| EN 12312-3:2017 Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles | reference withdrawn as of 15 April 2023 | C |
| EN 12312-5:2021 Aircraft ground support equipment – Specific requirements – Part 5: Aircraft fuelling equipment | reference published (presumption of conformity) | C |
| EN 12312-5:2005+A1:2009 Aircraft ground support equipment – Specific requirements – Part 5: Aircraft fuelling equipment | reference withdrawn as of 11 October 2023 | C |
| EN 12312-7:2020 Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equipment | reference published (presumption of conformity) | C |
| EN 12312-7:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment | reference withdrawn as of 15 April 2023 | C |
| EN 12312-8:2018 Aircraft ground support equipment – Specific requirements – Part 8: Maintenance or service stairs and platforms | reference published (presumption of conformity) | C |
| EN 12312-8:2005+A1:2009 Aircraft ground support equipment – Specific requirements – Part 8: Maintenance stairs and platforms | reference withdrawn as of 2 October 2021 | C |
| EN 12385-5:2021 Steel wire ropes – Safety – Part 5: Stranded ropes for lifts | reference published (presumption of conformity) | C |
| EN 12609:2021 Truck mixers – Safety requirements | reference published (presumption of conformity) | C |
| EN 12643:2014 Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992, Modified) | reference withdrawn as of 3 September 2022 | C |
| EN 12733:2018 Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety | reference published (presumption of conformity) | C |
| EN 12733:2001+A1:2009 Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety | reference withdrawn as of 2 October 2021 | C |
| EN 12965:2019 Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety | reference published (presumption of conformity) | C |
| EN 12965:2003+A2:2009 Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts and their guards - Safety | reference withdrawn as of 3 September 2022 | C |
| EN 12981:2005+A1:2009 Coating plants – Spray booths for application of organic powder coating material – Safety requirements | reference withdrawn as of 2 October 2021 | C |
| EN 12999:2020 Cranes - Loader cranes | reference published (presumption of conformity) | C |
| EN 12999:2011+A1:2012 Cranes — Loader cranes | reference withdrawn as of 19 September 2020 | C |
| EN 13001-2:2021 Crane safety – General design – Part 2: Load actions | reference published (presumption of conformity) | C |
| EN 13001-2:2014 Crane safety – General design – Part 2: Load actions | reference withdrawn as of 11 October 2023 | C |
| EN 13001-3-1:2012+A2:2018 Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure | reference published (presumption of conformity) | C |
| EN 13001-3-1:2012+A1:2013 Cranes — General Design — Part 3-1: Limit States and proof competence of steel structure | reference withdrawn as of 19 September 2020 | C |
| EN 13001-3-6:2018+A1:2021 Cranes – General design – Part 3-6: Limit states and proof of competence of machinery – Hydraulic cylinders | reference published (presumption of conformity) | C |
| EN 13135:2013+A1:2018 Cranes — Safety — Design — Requirements for equipment | reference published (presumption of conformity) | C |
| EN 13135:2013 Cranes — Safety — Design — Requirements for equipment | reference withdrawn as of 19 September 2020 | C |
| EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates — Product standard, performance characteristics | reference published (presumption of conformity) | C |
| EN 13241:2003+A2:2016 Industrial, commercial, garage doors and gates — Product standard, performance characteristics | reference withdrawn as of 19 September 2020 | C |
| EN 13355:2004+A1:2009 Coating plants – Combined booths – Safety requirements | reference withdrawn as of 2 October 2021 | C |
| EN 13411-1:2002+A1:2008 Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings | reference withdrawn as of 15 April 2023 | C |
| EN 13411-2:2001+A1:2008 Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings | reference withdrawn as of 15 April 2023 | C |
| EN 13411-3:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing | reference withdrawn as of 15 April 2023 | C |
| EN 13411-4:2011 Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing | reference withdrawn as of 15 April 2023 | C |
| EN 13411-5:2003+A1:2008 Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips | reference withdrawn as of 15 April 2023 | C |
| EN 13411-6:2004+A1:2008 Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket | reference withdrawn as of 15 April 2023 | C |
| EN 13411-7:2006+A1:2008 Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket | reference withdrawn as of 15 April 2023 | C |
| EN 13411-8:2011 Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging | reference withdrawn as of 15 April 2023 | C |
| EN 13525:2020 Forestry machinery - Wood chippers - Safety | reference published (presumption of conformity) | C |
| EN 13586:2020 Cranes - Access | reference published (presumption of conformity) | C |
| EN 13586:2004+A1:2008 Cranes - Access | reference withdrawn as of 15 April 2023 | C |
| EN 13684:2018 Garden equipment — Pedestrian controlled lawn aerators and scarifiers – Safety | reference published (presumption of conformity) | C |
| EN 13684:2004+A3:2009 Garden equipment — Pedestrian controlled lawn aerators and scarifiers – Safety | reference withdrawn as of 19 September 2020 | C |
| EN 13736:2003+A1:2009 Safety of machine tools — Pneumatic presses | reference withdrawn as of 19 September 2021 | C |
| EN 13852-3:2021 Cranes – Offshore cranes – Part 3: Light offshore cranes | reference published (presumption of conformity) | C |
| EN 14017:2005+A2:2009 Agricultural and forestry machinery — Solid fertilizer distributors – Safety | reference withdrawn as of 19 September 2020 | C |
| EN 14018:2005+A1:2009 Agricultural and forestry machinery – Seed drills – Safety | reference withdrawn as of 2 October 2021 | C |
| EN 14033-4:2019 Railway applications – Track – Railbound construction and maintenance machines – Part 4: Technical requirements for running, travelling and working on urban rail | reference published (presumption of conformity) | C |
| EN 15011:2020 Cranes - Bridge and gantry cranes | reference published (presumption of conformity) | C |
| EN 15011:2011+A1:2014 Cranes - Bridge and gantry cranes | reference withdrawn as of 15 April 2023 | C |
| EN 15194:2017 Cycles – Electrically power assisted cycles – EPAC Bicycles | reference published (presumption of conformity) | C |
| EN 15571:2020 Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface-finishing machines | reference published (presumption of conformity) | C |
| EN 15895:2011+A1:2018 Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools | reference published (presumption of conformity) | C |
| EN 15895:2011 Cartridge operated hand-held tools — Safety requirements — Fixing and hard marking tools | reference withdrawn as of 19 September 2020 | C |
| EN 16307-1:2020 Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks | reference published (presumption of conformity) | C |
| EN 16307-1:2013+A1:2015 Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks | reference withdrawn as of 15 April 2023 | C |
| EN 16486:2014+A1:2020 Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements | reference published (presumption of conformity) | C |
| EN 16486:2014 Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements | reference withdrawn as of 15 April 2023 | C |
| EN 16564:2020 Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions | reference published (presumption of conformity) | C |
| EN 16712-4:2018 Portable equipment for projecting extinguishing agents supplied by firefighting pumps – Portable foam equipment – Part 4: High expansion foam generators PN16 | reference published (presumption of conformity) | C |
| EN 16719:2018 Transport platforms | reference published (presumption of conformity) | C |
| EN 16770:2018 Safety of woodworking machines – Chip and dust extraction systems for indoor installation – Safety requirements | reference published (presumption of conformity) | C |
| EN 16808:2020 Petroleum, petrochemical and natural gas industries - Safety of machineries - Manual elevators | reference published (presumption of conformity) | C |
| EN 16851:2017+A1:2020 Cranes - Light crane systems | reference published (presumption of conformity) | C |
| EN 16851:2017 Cranes - Light crane systems | reference withdrawn as of 15 April 2023 | C |
| EN 16952:2018 Agricultural machinery — Rough-terrain Work Platforms for Orchard's operations (WPO) – Safety | reference published (presumption of conformity) | C |
| EN 16985:2018 Spray booths for organic coating material – Safety requirements | reference published (presumption of conformity) | C |
| EN 17059:2018 Plating and anodizing lines — Safety requirements | reference published (presumption of conformity) | C |
| EN 17067:2018 Forestry machinery – Safety requirements on radio remote controls | reference published (presumption of conformity) | C |
| EN 50569:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractors Amendments and corrigenda: EN 50569:2013/A1:2018 | reference published (presumption of conformity) | C |
| EN 50569:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric spin extractors | reference withdrawn as of 12 January 2021 | C |
| EN 50570:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryers Amendments and corrigenda: EN 50570:2013/A1:2018 | reference published (presumption of conformity) | C |
| EN 50570:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric tumble dryers | reference withdrawn as of 12 January 2021 | C |
| EN 50571:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machines Amendments and corrigenda: EN 50571:2013/A1:2018 | reference published (presumption of conformity) | C |
| EN 50571:2013 Household and similar electrical appliances — Safety — Particular requirements for commercial electric washing machines | reference withdrawn as of 12 January 2021 | C |
| EN 50636-2-107:2015 Safety of household and similar appliances — Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012 Modified) Amendments and corrigenda: EN 50636-2-107:2015/A1:2018 | reference published (presumption of conformity) | C |
| EN 50636-2-107:2015 Safety of household and similar appliances – Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers IEC 60335-2-107:2012 (Modified) Amendments and corrigenda: EN 50636-2-107:2015/A1:2018, EN 50636-2-107:2015/A2:2020, EN 50636-2-107:2015/A3:2021 | reference published (presumption of conformity) | C |
| EN 50636-2-107:2015 Safety of household and similar appliances — Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012 Modified) | reference withdrawn as of 12 January 2020 | C |
| EN 50636-2-107:2015 Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012, Modified) Amendments and corrigenda: EN 50636-2-107:2015/A1:2018 | reference withdrawn as of 3 September 2022 | C |
| EN 60204-1:2018 Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:2016, Modified) | reference published (presumption of conformity) | B |
| EN 60204-1:2006 Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:2005, Modified) Amendments and corrigenda: EN 60204-1:2006/AC:2010, EN 60204-1:2006/A1:2009 | reference withdrawn as of 2 October 2021 | B |
| EN 60204-11:2000 Safety of machinery – Electrical equipment of machines – Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV (IEC 60204-11:2000) Amendments and corrigenda: EN 60204-11:2000/AC:2010 | reference withdrawn as of 2 October 2021 | B |
| EN 60335-1:2012 Household and similar electrical appliances – Safety – Part 1: General requirements IEC 60335-1:2010 (Modified) Amendments and corrigenda: EN 60335-1:2012/AC:2014, EN 60335-1:2012/A11:2014, EN 60335-1:2012/A13:2017, EN 60335-1:2012/A15:2021 | reference published (presumption of conformity) | C |
| EN 60335-1:2012 Household and similar electrical appliances — Safety — Part 1: General requirements (IEC 60335-1:2010 Modified) Amendments and corrigenda: EN 60335-1:2012/A11:2014 | reference withdrawn as of 3 May 2020 | C |
| EN 60335-2-58:2005 Household and similar electrical appliances — Safety — Part 2-58: Particular requirements for commercial electric dishwashing machines (IEC 60335-2-58:2002 Modified) Amendments and corrigenda: EN 60335-2-58:2005/A2:2015, EN 60335-2-58:2005/A12:2016 | reference published (presumption of conformity) | C |
| EN 60745-2-1:2010 Hand-held motor-operated electric tools — Safety — Part 2-1: Particular requirements for drills and impact drills (IEC 60745-2-1:2003 Modified + A1:2008) | reference withdrawn as of 19 January 2022 | C |
| EN 60745-2-6:2010 Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers (IEC 60745-2-6:2003, Modified, + A1:2006) | reference withdrawn as of 15 April 2023 | C |
| EN 60745-2-13:2009 Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for chain saws (IEC 60745-2-13:2006, Modified) Amendments and corrigenda: EN 60745-2-13:2009/A1:2010 | reference withdrawn as of 3 May 2023 | C |
| EN 60745-2-17:2010 Hand-held motor-operated electric tools — Safety — Part 2-17: Particular requirements for routers and trimmers (IEC 60745-2-17:2010 Modified) | reference withdrawn as of 15 December 2021 | C |
| EN 60745-2-21:2009 Hand-held motor-operated electric tools – Safety – Part 2-21: Particular requirements for drain cleaners (IEC 60745-2-21:2002, Modified) Amendments and corrigenda: EN 60745-2-21:2009/A1:2010 | reference withdrawn as of 2 October 2021 | C |
| EN 61029-2-4:2011 Safety of transportable motor-operated electric tools — Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993 Modified + A1:2001 Modified) | reference withdrawn as of 24 June 2020 | C |
| EN 61496-1:2013 Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements and tests | reference withdrawn as of 19 September 2020 | C |
| EN 62061:2005 Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems IEC 62061:2005 Amendments and corrigenda: EN 62061:2005/AC:2010, EN 62061:2005/A1:2013, EN 62061:2005/A2:2015 | reference withdrawn as of 11 October 2023 | B |
| EN 62745:2017 Safety of machinery - Requirements for cableless control systems of machinery (IEC 62745:2017) Amendments and corrigenda: EN 62745:2017/A11:2020 | reference published (presumption of conformity) | B |
| EN 62841-2-1:2018 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-1: Particular requirements for hand-held drills and impact drills (IEC 62841-2-1:2017, Modified) Amendments and corrigenda: EN 62841-2-1:2018/A11:2019 | reference published (presumption of conformity) | C |
| EN 62841-2-11:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (IEC 62841-2-11:2015, Modified) Amendments and corrigenda: EN 62841-2-11:2016/A1:2020 | reference published (presumption of conformity) | C |
| EN 62841-2-11:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws (IEC 62841-2-11:2015, Modified) | reference withdrawn as of 3 September 2022 | C |
| EN 62841-2-17:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-17: Particular requirements for hand-held routers (IEC 62841-2-17:2017 Modified) | reference published (presumption of conformity) | C |
| EN 62841-2-21:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-21: Particular requirements for hand-held drain cleaners (IEC 62841-2-21:2017, Modified) | reference published (presumption of conformity) | C |
| EN 62841-3-1:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) Amendments and corrigenda: EN 62841-3-1:2014/A11:2017 | reference published (presumption of conformity) | C |
| EN 62841-3-1:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) | reference withdrawn as of 19 October 2019 | C |
| EN 62841-3-4:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016 Modified) Amendments and corrigenda: EN 62841-3-4:2016/A11:2017 | reference published (presumption of conformity) | C |
| EN 62841-3-4:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016, Modified) Amendments and corrigenda: EN 62841-3-4:2016/A11:2017, EN 62841-3-4:2016/A12:2020, EN 62841-3-4:2016/A1:2020 | reference published (presumption of conformity) | C |
| EN 62841-3-4:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders (IEC 62841-3-4:2016, Modified) Amendments and corrigenda: EN 62841-3-4:2016/A11:2017 | reference withdrawn as of 3 September 2022 | C |
| EN 62841-3-6:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) Amendments and corrigenda: EN 62841-3-6:2014/A11:2017 | reference published (presumption of conformity) | C |
| EN 62841-3-6:2014 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified) | reference withdrawn as of 19 October 2019 | C |
| EN 62841-3-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014 Modified) Amendments and corrigenda: EN 62841-3-9:2015/A11:2017 | reference published (presumption of conformity) | C |
| EN 62841-3-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014 Modified) | reference withdrawn as of 15 November 2019 | C |
| EN 62841-3-9:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2014, Modified) Amendments and corrigenda: EN 62841-3-9:2015/AC:2016-09, EN 62841-3-9:2015/A11:2017 | reference withdrawn as of 3 September 2022 | C |
| EN 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015 Modified) Amendments and corrigenda: EN 62841-3-10:2015/A11:2017 | reference published (presumption of conformity) | C |
| EN 62841-3-10:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015 Modified) | reference withdrawn as of 19 October 2019 | C |
| EN 62841-3-12:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-12: Particular requirements for transportable threading machines (IEC 62841-3-12:2017) | reference published (presumption of conformity) | C |
| EN 62841-3-14:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 3-14: Particular requirements for transportable drain cleaners (IEC 62841-3-14:2017 Modified) | reference published (presumption of conformity) | C |
| EN 62841-4-1:2020 Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws (IEC 62841-4-1:2017, Modified) | reference published (presumption of conformity) | C |
| EN 62841-4-2:2019 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-2: Particular requirements for hedge trimmers (IEC 62841-4-2:2017, Modified) | reference published (presumption of conformity) | C |
| EN IEC 60204-11:2019 Safety of machinery – Electrical equipment of machines – Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV (IEC 60204-11:2018) | reference published (presumption of conformity) | B |
| EN IEC 62061:2021 Safety of machinery – Functional safety of safety-related control systems IEC 62061:2021 | reference published (presumption of conformity) | B |
| EN IEC 62841-2-6:2020 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers (IEC 62841-2-6:2020, Modified) Amendments and corrigenda: EN IEC 62841-2-6:2020/A11:2020 | reference published (presumption of conformity) | C |
| EN IEC 62841-3-9:2020 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2020) Amendments and corrigenda: EN IEC 62841-3-9:2020/A11:2020 | reference published (presumption of conformity) | C |
| EN ISO 3691-1:2015 Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013) Amendments and corrigenda: EN ISO 3691-1:2015/AC:2016, EN ISO 3691-1:2015/A1:2020 | reference published (presumption of conformity) | C |
| EN ISO 3691-1:2015 Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor 1:2013) Amendments and corrigenda: EN ISO 3691-1:2015/AC:2016 | reference withdrawn as of 3 September 2022 | C |
| EN ISO 3691-5:2015 Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) Amendments and corrigenda: EN ISO 3691-5:2015/A1:2020 | reference published (presumption of conformity) | C |
| EN ISO 3691-5:2014 Industrial trucks – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014) Amendments and corrigenda: EN ISO 3691-5:2014/AC:2014 | reference withdrawn as of 2 October 2021 | C |
| EN ISO 3743-2:2019 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:2018) | reference published (presumption of conformity) | B |
| EN ISO 3743-2:2009 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:1994) | reference withdrawn as of 15 April 2023 | B |
| EN ISO 4254-5:2018 Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2018) | reference published (presumption of conformity) | C |
| EN ISO 4254-5:2009 Agricultural machinery — Safety — Part 5: Power-driven soil-working machines (ISO 4254-5:2008) | reference withdrawn as of 19 September 2020 | C |
| EN ISO 4254-7:2017 Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017) | reference published (presumption of conformity) | C |
| EN ISO 4254-7:2009 Agricultural machinery — Safety — Part 7: Combine harvesters, forage harvesters and cotton harvesters (ISO 4254-7:2008) | reference withdrawn as of 19 September 2020 | C |
| EN ISO 4254-8:2018 Agricultural machinery — Safety — Part 8: Solid fertilizer distributors (ISO 4254-8:2018) | reference published (presumption of conformity) | C |
| EN ISO 4254-9:2018 Agricultural machinery – Safety – Part 9: Seed drills (ISO 4254-9:2018) | reference published (presumption of conformity) | C |
| EN ISO 4254-11:2010 Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010) Amendments and corrigenda: EN ISO 4254-11:2010/A1:2020 | reference published (presumption of conformity) | C |
| EN ISO 4254-11:2010 Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010) | reference withdrawn as of 3 September 2022 | C |
| EN ISO 5010:2019 Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019) | reference published (presumption of conformity) | C |
| EN ISO 5395-1:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013) Amendments and corrigenda: EN ISO 5395-1:2013/A1:2018 | reference published (presumption of conformity) | C |
| EN ISO 5395-1:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests (ISO 5395-1:2013) | reference withdrawn as of 19 September 2020 | C |
| EN ISO 5395-3:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) Amendments and corrigenda: EN ISO 5395-3:2013/A1:2017, EN ISO 5395-3:2013/A2:2018 | reference published (presumption of conformity) | C |
| EN ISO 5395-3:2013 Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) Amendments and corrigenda: EN ISO 5395-3:2013/A1:2017 | reference withdrawn as of 19 September 2020 | C |
| EN ISO 7096:2020 Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020) | reference published (presumption of conformity) | C |
| EN ISO 7096:2008 Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000) Amendments and corrigenda: EN ISO 7096:2008/AC:2009 | reference withdrawn as of 3 September 2022 | C |
| EN ISO 10517:2019 Powered hand-held hedge trimmers – Safety (ISO 10517:2019) | reference published (presumption of conformity) | C |
| EN ISO 10517:2009 Powered hand-held hedge trimmers – Safety (ISO 10517:2009) Amendments and corrigenda: EN ISO 10517:2009/A1:2013 | reference withdrawn as of 2 October 2021 | C |
| EN ISO 11148-13:2018 Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools (ISO 11148-13:2017) | reference published (presumption of conformity) | C |
| EN ISO 11200:2014 Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions | reference withdrawn as of 19 September 2020 | B |
| EN ISO 11202:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) Amendments and corrigenda: EN ISO 11202:2010/A1:2021 | reference published (presumption of conformity) | B |
| EN ISO 11202:2010 Acoustics – Noise emitted by machinery and equipment – Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) | reference withdrawn as of 11 October 2023 | B |
| EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) Amendments and corrigenda: EN ISO 11203:2009/A1:2020 | reference published (presumption of conformity) | B |
| EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995) | reference withdrawn as of 3 September 2022 | B |
| EN ISO 11553-1:2020 Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 11553-1:2020) Amendments and corrigenda: EN ISO 11553-1:2020/A11:2020 | reference published (presumption of conformity) | B |
| EN ISO 11553-1:2008 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005) | reference withdrawn as of 15 April 2023 | C |
| EN ISO 13766-2:2018 Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018) | reference published (presumption of conformity) | C |
| EN ISO 13851:2019 Safety of machinery - Two-hand control devices - Principles for design and selection (ISO 13851:2019) | reference published (presumption of conformity) | B |
| EN ISO 13854:2019 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854:2017) | reference published (presumption of conformity) | B |
| EN ISO 13857:2019 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2019) | reference published (presumption of conformity) | B |
| EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) | reference withdrawn as of 3 September 2022 | B |
| EN ISO 14118:2018 Safety of machinery — Prevention of unexpected start-up (ISO 14118:2017) | reference published (presumption of conformity) | B |
| EN ISO 15012-4:2016 Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016) | reference withdrawn as of 3 September 2022 | C |
| EN ISO 16092-1:2018 Machine tools safety — Presses — Part 1: General safety requirements (ISO 16092-1:2017) | reference published (presumption of conformity) | C |
| EN ISO 16092-2:2020 Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019) | reference published (presumption of conformity) | C |
| EN ISO 16092-3:2018 Machine tools safety — Presses — Part 3: Safety requirements for hydraulic presses (ISO 16092-3:2017) | reference published (presumption of conformity) | C |
| EN ISO 16092-4:2020 Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019) | reference published (presumption of conformity) | C |
| EN ISO 18497:2018 Agricultural machinery and tractors – Safety of highly automated agricultural machines – Principles for design (ISO 18497:2018) | reference published (presumption of conformity) | B |
| EN ISO 19085-1:2021 Woodworking machines – Safety – Part 1: Common requirements (ISO 19085-1:2021) | reference published (presumption of conformity) | C |
| EN ISO 19085-1:2017 Woodworking machines – Safety – Part 1: Common requirements (ISO 19085-1:2017) | reference withdrawn as of 11 October 2023 | C |
| EN ISO 19085-3:2017 Woodworking machines – Safety requirements – Part 3: Numerically controlled (NC) boring and routing machines | reference published (presumption of conformity) | C |
| EN ISO 19085-4:2018 Woodworking machines — Safety — Part 4: Vertical panel circular sawing machines (ISO 19085-4:2018) | reference published (presumption of conformity) | C |
| EN ISO 19085-6:2017 Woodworking machines — Safety — Part 6: Single spindle vertical moulding machines (‘toupies’) (ISO 19085-6:2017) | reference published (presumption of conformity) | C |
| EN ISO 19085-7:2019 Woodworking machines – Safety – Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019) | reference published (presumption of conformity) | C |
| EN ISO 19085-8:2018 Woodworking machines — Safety — Part 8: Belt sanding and calibrating machines for straight workpieces (ISO 19085-8:2017) | reference published (presumption of conformity) | C |
| EN ISO 19085-9:2020 Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2019) | reference published (presumption of conformity) | C |
| EN ISO 19085-10:2019 Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-10:2018) Amendments and corrigenda: EN ISO 19085-10:2019/A11:2020 | reference published (presumption of conformity) | C |
| EN ISO 19085-11:2020 Woodworking machines - Safety - Part 11: Combined machines (ISO 19085-11:2020) | reference published (presumption of conformity) | C |
| EN ISO 19085-13:2020 Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2020) | reference published (presumption of conformity) | C |
| EN ISO 19225:2017 Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems (ISO 19225:2017) Amendments and corrigenda: EN ISO 19225:2017/A1:2019 | reference published (presumption of conformity) | C |
| EN ISO 19296:2018 Mining – Mobile machines working underground – Machine safety (ISO 19296:2018) | reference published (presumption of conformity) | C |
| EN ISO 19353:2019 Safety of machinery – Fire prevention and fire protection (ISO 19353:2019) | reference published (presumption of conformity) | B |
| EN ISO 19353:2016 Safety of machinery – Fire prevention and fire protection (ISO 19353:2015) | reference withdrawn as of 2 October 2021 | B |
| EN ISO 19432:2012 Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) | reference withdrawn as of 3 September 2022 | C |
| EN ISO 19432-1:2020 Building construction machinery and equipment - Portable, hand-held, internal combustion engine-driven abrasive cutting machines - Part 1: Safety requirements for cut-off machines for centre-mounted rotating abrasive wheels (ISO 19432-1:2020) | reference published (presumption of conformity) | C |
| EN ISO 20361:2019 Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2019) Amendments and corrigenda: EN ISO 20361:2019/A11:2020 | reference published (presumption of conformity) | C |
| EN ISO 20361:2015 Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015) | reference withdrawn as of 3 September 2022 | C |
| EN ISO 20430:2020 Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020) | reference published (presumption of conformity) | C |
| EN ISO 20607:2019 Safety of machinery – Instruction handbook – General drafting principles (ISO 20607:2019) | reference published (presumption of conformity) | B |
| EN ISO 21904-1:2020 Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: General requirements (ISO 21904-1:2020) | reference published (presumption of conformity) | C |
| EN ISO 22868:2021 Forestry and gardening machinery – Noise test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy) (ISO 22868:2021) | reference published (presumption of conformity) | C |
| EN ISO 22868:2011 Forestry and gardening machinery – Noise test code for portable hand-held machines with internal combustion engine – Engineering method (Grade 2 accuracy) (ISO 22868:2011) | reference withdrawn as of 11 October 2023 | C |
| EN ISO 28927-2:2009 Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) Amendments and corrigenda: EN ISO 28927-2:2009/A1:2017 | reference published (presumption of conformity) | C |
| EN ISO 28927-2:2009 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009) | reference withdrawn as of 2 October 2021 | C |
| EN ISO 28927-4:2010 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010) Amendments and corrigenda: EN ISO 28927-4:2010/A1:2018 | reference published (presumption of conformity) | C |
| EN ISO 28927-4:2010 Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010) | reference withdrawn as of 2 April 2020 | C |
| EN ISO/IEC 80079-38:2016 Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016) Amendments and corrigenda: EN ISO/IEC 80079-38:2016/A1:2018 | reference published (presumption of conformity) | C |